lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 05-26-2014, 10:10 PM   #1
Not Yet Wild
Club Car
 
Join Date: May 2014
Location: Charlotte, NC
Posts: 5
Default PC Program for Curtis 1510A Controller

Does anyone know where I can download the pc software to get to user level access on the curtis 1510a-5251 controller?

I have an 09 CC Precedent iQ that is currently on speed code 1 and would like to get it to at least 3.
dkboik is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 05-26-2014, 10:13 PM   #2
ΜΟΛΩΝ ΛΑΒΕ
 
93yellowclubcar's Avatar
Club Car
 
Join Date: Nov 2012
Location: West Virginia
Posts: 4,094
Default Re: PC Program for Curtis 1510A Controller

I do believe you need a handheld IQDM something or other scanner to mess with those controllers...
93yellowclubcar is offline   Reply With Quote
Unread 05-26-2014, 10:34 PM   #3
Member #16,745
 
jakesnake27's Avatar
Harley Davidson
 
Join Date: Aug 2009
Location: Missouri
Posts: 9,910
Default Re: PC Program for Curtis 1510A Controller

I agree, I think the only way to program those is with an IQDM CC programmer...
jakesnake27 is offline   Reply With Quote
Unread 05-26-2014, 10:38 PM   #4
Old Sky Soldier
 
mrgolf's Avatar
Club Car
 
Join Date: Dec 2011
Location: Kentucky
Posts: 2,982
Default Re: PC Program for Curtis 1510A Controller

Do a web search for speed code 5. I can say for sure it does work I have had it on my cart for several months and am very pleased with it. I run 23 to 24 mph on level ground.
mrgolf is offline   Reply With Quote
Unread 05-26-2014, 10:47 PM   #5
Not Yet Wild
Club Car
 
Join Date: May 2014
Location: Charlotte, NC
Posts: 5
Default Re: PC Program for Curtis 1510A Controller

Thanks for the quick replies!

I thought I seen where there was a 1314 pc software version out there where you you can connect through serial port to make changes. I thought it was for a 1268 controller which is supposed to be a direct replacement for the 1510A controller.

I seen the speed code 5 device but I was a little leery....it might be the best option if it works; however, I don't know if I want that kind of speed with the kids on it.
dkboik is offline   Reply With Quote
Unread 05-27-2014, 12:48 AM   #6
STEALTH 4X4
 
sunoco's Avatar
Club Car
 
Join Date: Sep 2011
Location: GA
Posts: 2,017
Default Re: PC Program for Curtis 1510A Controller

Why do you think it's on speed code 1?
sunoco is offline   Reply With Quote
Unread 05-27-2014, 01:07 AM   #7
Not Yet Wild
Club Car
 
Join Date: May 2014
Location: Charlotte, NC
Posts: 5
Default Re: PC Program for Curtis 1510A Controller

Quote:
Originally Posted by sunoco View Post
Why do you think it's on speed code 1?
Good question.

I started with MCOR and found it bad so replaced it and now getting good voltage range.

Speed sensor seems to be functional as well. I will get regen and rolling beeper when trying to push the cart in forward and reverse.

Load tested batteries and they appear to be fine.

Motor voltage with pedal fully pushed results in 29V at motor for 48V system. So I am assuming this is more than likely a speed code of 1.

That is how I kind of got to this point.
dkboik is offline   Reply With Quote
Unread 05-27-2014, 01:37 PM   #8
Gone Wild
 
Join Date: Aug 2011
Posts: 384
Arrow Re: PC Program for Curtis 1510A Controller

Speed is how you tell what speed code your in or using a scope. Measuring voltage with a meter at the motor is not a good test ( depending on meter )on controller carts. if your meter is a cheepie try measuring on the AC scale this may be more accurate (remember your measuring pulsed dc at full voltage). Also the on this type of cart you have F terminals and A terminals which one did you measure.
greg-g is offline   Reply With Quote
Unread 05-27-2014, 10:43 PM   #9
Not Yet Wild
Club Car
 
Join Date: May 2014
Location: Charlotte, NC
Posts: 5
Default Re: PC Program for Curtis 1510A Controller

Quote:
Originally Posted by greg-g View Post
Also the on this type of cart you have F terminals and A terminals which one did you measure.
I measured on the A terminals. Measured again using both AC and DC and got pretty much the exact same voltage around 29V.

I bought the cart from a golf course so I really can't believe they were using it at speed code 1. I benched tested the new MCOR but tonight I measured the voltage on the slider side of the potentiometer at the 16 pin controller and got 3.15VDC when pedal was fully pushed. I had 4.65VDC on the high side of the potentiometer so now this makes me think it's a pedal issue.

If I find out the cart is setup for speed code 3, is there a setting to allow the full throttle voltage to be 3.15 V? Or should I be looking at something else? Also, tomorrow I will get it's speed using GPS.
dkboik is offline   Reply With Quote
Reply

Tags
1510a, pc program
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Club Car Precedent IQ Curtis 1510A-5250 Controller Golf Carts and Parts
Curtis 1510A-5350 No speed code 4? Electric Club Car
Programming Curtis Controller Model 1510A-5251 Electric Club Car
Curtis Controller 1510A-5251 250 Amp Golf Carts and Parts
Curtis 1510A-5250 Motor Controller Electric Club Car


All times are GMT -5. The time now is 09:49 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.