lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 06-19-2014, 08:43 AM   #1
Gone Wild
 
scooterman's Avatar
Club Car
 
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,642
Default Controller solenoid cover ideas?

Now that I upgraded the controller. solenoid, wires etc, the original cover was never meant to hold so much more. I modded up the original to fit sorta but I'd like to actually make a better one to close it more. The reason why is dust mainly, where I plan on using it is dusty roads, this doesn't fair well with electronics. Any Pics or Ideas, maybe I can use what I have and just add to it, I had to cut it up some to allow the wiring and solenoid to protrude out some.
scooterman is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-19-2014, 09:27 AM   #2
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,088
Default Re: Controller solenoid cover ideas?

If you use a bigger aftermarket control like Alltrax you do not want to cover it completely. These bigger controls pass more amperage and produce more heat. They need to be exposed to dissipate this additional heat. They are potted in resin which makes them water resistant. The original control was not potted in resin which is why they covered it.
Below is the cut diagram for Sepex drive carts
Hope this helps
Attached Images
File Type: jpg ezgo controller cover - jpeg.jpg (47.0 KB, 0 views)
scottyb is offline   Reply With Quote
Unread 06-19-2014, 10:28 AM   #3
Gone Wild
 
scooterman's Avatar
Club Car
 
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,642
Default Re: Controller solenoid cover ideas?

Well that was easy, I hacked it about that much, should get good airflow. I wonder if that Curtis I got was potted, It has a heat-sink that is about 1/2" thick easy double that of the Alltrax.
scooterman is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Repair/cover up ideas? Gas Club Car
Rear Seat Pad and Cover ideas? Design Center
Radio cover ideas - Design Center
Anyone have ball holder cover ideas? Gas EZGO
83 has second solenoid and switch - any ideas?? Electric EZGO


All times are GMT -5. The time now is 06:09 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.