lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-24-2008, 12:53 PM   #1
wolf
Not Yet Wild
Club Car
 
Join Date: Aug 2008
Location: Pittsburgh, PA
Posts: 30
Default I need wiring help please

Hello all, hope someone can help I have a 1995 cc and the curtis controller that was on it has four terminals, the fourth being A2 with a white cable from f/r and a white cable to A2 on motor. So I ordered a alltrax controller with the A2 terminal. (plug brake) but the alltrax wiring diagram shows only 1 wire coming off of A2 going to motor and another wire from motor A2 to a reversing contactor which my cart didn't have

The wiring diagram in the stickys doesn't show a termial A2 on the controller
or a second contactor .(white wire from f/r staight to A2 on motor)

how should I wire this thing up?
wolf is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-24-2008, 01:54 PM   #2
shadowman
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: I need wiring help please

wolf, where you at in pittsburgh? i,m south of bridgeville in cecil...........your cart the altrax controller didn,t have an A-2 stud right......it came with just 3 studs instead of 4................if thats the case the 2 cables that were mounted to the A-2 stud on the curtis what you do is bolt them 2 togather and tape them up real good than secure them somewhere so they arn,t just flopping around because they arn,t used on the alltrax..........also make sure you use the 250 amp fuse that came with it.........if you look at the quick install guide they sent you with the controller it tells you just what to do........................................
shadowman is offline   Reply With Quote
Old 10-24-2008, 03:26 PM   #3
wolf
Not Yet Wild
Club Car
 
Join Date: Aug 2008
Location: Pittsburgh, PA
Posts: 30
Default Re: I need wiring help please

hey thanks shadowman I'm in west mifflin near co. airport. this is my first build and it's been a real learning experience I've learned alot from this forum. I ended up calling alltrax they said f/r to controller A2 then to motor A2 the same way it was. I was confused because wiring diagram in sticky doesn't show A2 on the controller. anyway time to tackle the next problem larger cable and lugs getting them on the heavy duty f/r switch!
wolf is offline   Reply With Quote
Old 10-24-2008, 03:51 PM   #4
shadowman
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: I need wiring help please

good luck and we are here if we can help...........i know just where the airport is up there......................................
shadowman is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes



All times are GMT -5. The time now is 03:11 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.