I know, I'm not the sharp knife

Masher99 · 07-10-2014, 04:24 PM

97 48v cc series according to the diagram - I thought I was dealing with a vglide but I see nothing that looks like the picture behind the drivers seat or in the battery area, so if it is the beloved potbox, where is it located and can anyone link a pic for me

tjequip · 07-10-2014, 07:20 PM

Check under go pedal.

07-10-2014, 07:50 PM

here you go

you have a 48v power drive systems

scottyb · 07-10-2014, 10:26 PM

Cart serial # please ......

Masher99 · 07-11-2014, 03:13 PM

had it, lost it, will get again this weekend ~thanks

Masher99 · 07-15-2014, 06:12 AM

A9702-553601 after flipping thru 500 pages thought for sure I was dealing with a vglide issue, obviously I'm not. New solenoid, all terminals clean, all batts good, fnr witch clean and contacts secure, touch go pedal, put on neck brace

shaffer88 · 07-16-2014, 03:53 PM

Have you put on a new controller or anything? Wondering if it's a 0-5k and something was replaced requiring 5k-0? Just a thought

Masher99 · 07-16-2014, 04:27 PM

straight from the dealer new, no mods

Masher99 · 07-17-2014, 05:42 AM

can get the stem loose to come through the pedal, is there a c clip I don't see in there somewhere?

07-10-2014, 04:24 PM	#1
Masher99 Not Yet Wild Join Date: Jun 2014 Posts: 8	I know, I'm not the sharp knife 97 48v cc series according to the diagram - I thought I was dealing with a vglide but I see nothing that looks like the picture behind the drivers seat or in the battery area, so if it is the beloved potbox, where is it located and can anyone link a pic for me
Masher99 Not Yet Wild Join Date: Jun 2014 Posts: 8

07-10-2014, 07:20 PM	#2
tjequip Gone Wild Join Date: Oct 2009 Location: Alva Fla Posts: 608	Re: I know, I'm not the sharp knife Check under go pedal.

07-10-2014, 07:50 PM	#3
crash test dummy Guest Posts: n/a	Re: I know, I'm not the sharp knife here you go you have a 48v power drive systems
crash test dummy Guest Posts: n/a

07-10-2014, 10:26 PM	#4
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: I know, I'm not the sharp knife Cart serial # please ......

07-11-2014, 03:13 PM	#5
Masher99 Not Yet Wild Join Date: Jun 2014 Posts: 8	Re: I know, I'm not the sharp knife had it, lost it, will get again this weekend ~thanks
Masher99 Not Yet Wild Join Date: Jun 2014 Posts: 8

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-15-2014, 06:12 AM	#6
Masher99 Not Yet Wild Join Date: Jun 2014 Posts: 8	Re: I know, I'm not the sharp knife A9702-553601 after flipping thru 500 pages thought for sure I was dealing with a vglide issue, obviously I'm not. New solenoid, all terminals clean, all batts good, fnr witch clean and contacts secure, touch go pedal, put on neck brace
Masher99 Not Yet Wild Join Date: Jun 2014 Posts: 8

07-16-2014, 03:53 PM	#7
shaffer88 Gone Wild Join Date: May 2013 Posts: 552	Have you put on a new controller or anything? Wondering if it's a 0-5k and something was replaced requiring 5k-0? Just a thought
shaffer88 Gone Wild Join Date: May 2013 Posts: 552

07-16-2014, 04:27 PM	#8
Masher99 Not Yet Wild Join Date: Jun 2014 Posts: 8	Re: I know, I'm not the sharp knife straight from the dealer new, no mods
Masher99 Not Yet Wild Join Date: Jun 2014 Posts: 8

07-17-2014, 05:42 AM	#9
Masher99 Not Yet Wild Join Date: Jun 2014 Posts: 8	Re: I know, I'm not the sharp knife can get the stem loose to come through the pedal, is there a c clip I don't see in there somewhere?
Masher99 Not Yet Wild Join Date: Jun 2014 Posts: 8

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Something slips when going up a hill or turning sharp.	Gas Club Car
Why not to use knife as screw driver!!!	Gas Yamaha
Sharp turning to right, not left?	Gas EZGO