lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 07-20-2014, 05:27 PM   #1
Getting Wild
Club Car
 
Join Date: Feb 2011
Location: alabama
Posts: 82
Default vglide help

36v ds no resistors at batts 400a controller been useing my vglide taped to steering with longer wires untill i got a new case asem to swap all internals into,old one broke where it mounts to frame, worked great there, new case come in i swapped little resistors, wiper arm, wires, stop cushion,micro switch, i layed out little resistors as they come off old to install on new, now i hear solonoid click if i move throtle any but no foward at all, tried reverse and just one time just touched throtle it tried wide open but only did it one time, now no rev or foward, i hear solonoid click good but no movement at all, picts of new vglide and internals swapped into it with wires.???
Attached Images
File Type: jpg vglide2.jpg (119.4 KB, 0 views)
File Type: jpg vglide1.jpg (91.8 KB, 0 views)
wedge542 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-20-2014, 05:46 PM   #2
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,068
Default Re: vglide help

Yours is a 2 wire multi-step potentiometer. THe output signal should be close to 0-5000 Ωs. Can you test it?
scottyb is offline   Reply With Quote
Unread 07-20-2014, 05:49 PM   #3
Getting Wild
Club Car
 
Join Date: Feb 2011
Location: alabama
Posts: 82
Default Re: vglide help

how do i test this without a meter?
wedge542 is offline   Reply With Quote
Unread 07-20-2014, 05:57 PM   #4
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,068
Default Re: vglide help

Quote:
Originally Posted by wedge542 View Post
how do i test this without a meter?
IDK. You tried the go test ... that didn't work. You could try a few other wire combinations but swapping wires around to see what happens can have catastrophic results.
Did you take a cellphone pic of the old resistor arrangement before dis-assembly?

Buy a meter - Every cart owner needs one
scottyb is offline   Reply With Quote
Unread 07-20-2014, 06:14 PM   #5
Getting Wild
Club Car
 
Join Date: Feb 2011
Location: alabama
Posts: 82
Default Re: vglide help

ill go find a meter to test, when i took the resistors off i layed them in order to put on in same arrangment, my wife said last week the cart did jump alot when moveing the throtle one time but not again afterwards, is there any way i bought the wrong vglide case?
wedge542 is offline   Reply With Quote
Unread 07-20-2014, 07:44 PM   #6
Getting Wild
Club Car
 
Join Date: Feb 2011
Location: alabama
Posts: 82
Default Re: vglide help

ok, bought a meter, do i need to take the resistors out and test each and add them up? or hows best way to test with this meter?
wedge542 is offline   Reply With Quote
Unread 07-20-2014, 07:45 PM   #7
Old Sky Soldier
 
mrgolf's Avatar
Club Car
 
Join Date: Dec 2011
Location: Kentucky
Posts: 2,976
Default Re: vglide help

I'm not very knowledgeable on v glides , but in the photo the resistors don't make sense they way they are connected. Looks like some skip the pattern. That may be the way they are suppose to be, but just saying.
mrgolf is offline   Reply With Quote
Unread 07-20-2014, 07:50 PM   #8
Getting Wild
Club Car
 
Join Date: Feb 2011
Location: alabama
Posts: 82
Default Re: vglide help

nothing on first term but after that each resistor overlays to the next term, thats how they come off old one anyway
wedge542 is offline   Reply With Quote
Unread 07-20-2014, 07:55 PM   #9
Old Sky Soldier
 
mrgolf's Avatar
Club Car
 
Join Date: Dec 2011
Location: Kentucky
Posts: 2,976
Default Re: vglide help

Photo looks like some May skip to second instead on next.
mrgolf is offline   Reply With Quote
Unread 07-20-2014, 08:00 PM   #10
Getting Wild
Club Car
 
Join Date: Feb 2011
Location: alabama
Posts: 82
Default Re: vglide help

i just noticed mines got 6 resistors but the updated kit has 7 so i may need the resistor kit. but this still worked before, do i remove resistors to test?
wedge542 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Club Car Vglide Golf Carts and Parts
resistor kit vglide ? Electric Club Car
6ga to 4ga cables vglide? Electric Club Car
97 cc 36v vglide conversion Electric Club Car
Question converting VGlide&coils to Vglide&controller Electric Club Car


All times are GMT -5. The time now is 11:21 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.