This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|07-23-2014, 06:37 AM||#13|
Join Date: Sep 2012
Location: Charlotte, NC
Re: Missing 12 Pin Connector
It is hard to see some of the details on the picture, but the #8 bullet connector should plug to the bullet connector on your first picture.
That bullet connector in the dashboard brings the +48v from the key switch (cold side) to the harness. If you follow the wire it should go to the trigger wire in your voltage reducer. That will turn the reducer on and off with the key switch.
You already have 2 fuses, 1 large one in the #1 wire which is there to protect the wiring in the harness and a smaller one by the voltage converter which is there to somewhat protect the voltage converter.
I am not sure what the intended use for that breaker is, if the kit did not come with any instructions, is there a 5/16 ring connector at the end of #6 or what are the specs printed on the breaker?
|16 pin connector||Electric Club Car|
|Source for 10-pin connector||Electric EZGO|
|G22 Unplugged Connector||Electric Yamaha|
|WTB Curtis 16-pin Connector||Golf Carts and Parts|
|Where is the six pin connector||Electric EZGO|