|
07-26-2014, 12:53 PM
|
#1 |
|
Guest
Posts: n/a
|
02 not reverse
2002 48v club car powerdrive w/MCOR
replaced MCOR ... forward no problem reverse stopped after 1st time went 10' then next time no go .. reverse buzzer comes on then off when peddle is pushed ... solenoid clicks ... can hear limit switches engage .. tapping on them i get reverse ... which switch is the control for reverse ? |
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-26-2014, 02:30 PM
|
#2 |
|
Getting Wild
Join Date: Oct 2012
Posts: 116
|
Re: 02 not reverse
The switch closest to the rear of the cart. Swap the wires around and see if you get reverse. If you do , the half speed resistor is bad. If you still only get forward, you probably need a new f/r switch.
|
|
|
|
07-26-2014, 02:36 PM
|
#3 | |
|
DS Drivers Club Founder
 Join Date: Jul 2013
Location: Upstate NY
Posts: 3,428
|
Re: 02 not reverse
Quote:
|
|
|
|
|
|
07-26-2014, 03:06 PM
|
#4 | ||
|
Guest
Posts: n/a
|
Re: 02 not reverse
Quote:
Quote:
|
||
|
|
|
07-27-2014, 02:35 PM
|
#5 |
|
Gone Wild
Join Date: Feb 2011
Location: Chattanooga TN
Posts: 2,105
|
Re: 02 not reverse
Did you put the Run/Tow switch in Tow?
|
|
|
|
|
07-27-2014, 03:40 PM
|
#6 | |
|
Guest
Posts: n/a
|
Re: 02 not reverse
Quote:
that's the powewdrive plus 48v  |
|
|
|
|
07-27-2014, 03:40 PM
|
#7 | |
|
DS Drivers Club Founder
Join Date: Jul 2013
Location: Upstate NY
Posts: 3,428
|
Re: 02 not reverse
Quote:
|
|
|
|
|
|
07-27-2014, 03:46 PM
|
#8 |
|
ΜΟΛΩΝ ΛΑΒΕ
Join Date: Nov 2012
Location: West Virginia
Posts: 4,094
|
Re: 02 not reverse
Crash, remove the green and white wires (should be the top and bottom ones) on the furthest rear microswitch and jump them together. This will give you full speed reverse, but if it works should let you know the problem is in the switch or the resistor.
|
|
|
|
|
07-27-2014, 04:16 PM
|
#9 |
|
Guest
Posts: n/a
|
Re: 02 not reverse
i don't know if that test will work now as cart is acting normal ... thinking on replacing all 3 micro switches Monday .. lighting around here right now .. rain is ok but the lighting has tried to get me before
was looking at only replacing the reverse switch "the resistor" is that replaceable ? i see it in diagram .. would tapping on switch cause the resistor to work ? |
|
|
|
07-27-2014, 04:22 PM
|
#10 |
|
ΜΟΛΩΝ ΛΑΒΕ
Join Date: Nov 2012
Location: West Virginia
Posts: 4,094
|
Re: 02 not reverse
You'd have to cut and splice a new one of the correct value in for the resistor, but honestly I don't think that's your problem. I'm guessing the switch is sticking part time and unsticking when tapped, and replacing it will fix your issues.
As for jumping the wires, thinking about it I'm not too sure that'd tell you anything at all, but you'd get style points for passing other carts in reverse.  |
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| wiring a reverse light to the reverse buzzer? | Gas Yamaha | |||
| Goes in reverse when switch is in forward. does nothing with swicth in reverse | Electric EZGO | |||
| Reverse won't go but if I pump gas it slams into reverse | Electric Club Car | |||
| Foward in reverse and reverse in forward | Electric Club Car | |||
| Reverse alarm stuck - motor won't run forward or reverse | Electric EZGO | |||
Linear Mode
