MCOR / Pedal Assembly Confusion Explained

TahoeDawgZ71 · 10-04-2018, 10:12 PM

I do not have a digital copy of these instructions. I'll see if I can dig some up Monday. I'm not working tomorrow. Wife and I are going to a concert. As for the pivot rod, the 102026001 has an extra barb that fits into the drive bar to keep it from falling off. The old ones don't have this. It'll fit around the base of the pedal, but it'll be sloppy. You'll probably end up having to use it.

BBBHC · 10-08-2018, 07:15 AM

That would be very helpful David! I've looked around, but don't see any clear install pictures/diagrams for how it is mounted.

TahoeDawgZ71 · 10-08-2018, 11:40 AM

Quote:

Originally Posted by BBBHC

That would be very helpful David! I've looked around, but don't see any clear install pictures/diagrams for how it is mounted.

PM me your email address. I now have a digital copy.

Txpartyguy · 10-14-2018, 08:21 PM

I have a 2014 precedent anyone know if the mcor 4 will hook right up with out any type of conversion plug or anything or do I need to take apart before I order part to make sure don’t really want to take apart till I got part as I can still use my cart...Thanx

TahoeDawgZ71 · 10-15-2018, 08:17 AM

Quote:

Originally Posted by Txpartyguy

I have a 2014 precedent anyone know if the mcor 4 will hook right up with out any type of conversion plug or anything or do I need to take apart before I order part to make sure don’t really want to take apart till I got part as I can still use my cart...Thanx

Yes, It's a direct replacement. You do not need a conversion kit, just the MCOR 4.

67msarge · 11-27-2018, 05:32 PM

TahoeDawg, ordered my MCOR2 to MCOR4 Conversion Kit for Precedent with Gen2 Pedal Assy - AM293001 from ya. hope it cures my problems. benched checked old one and resistance was jumping all over the place just like when driving it!

Thanks
Lee

Aleone · 02-12-2019, 11:12 AM

When I accelerate to the floor the cart stops any thoughts

NoleFan4Ever · 02-12-2019, 11:25 AM

Quote:

Originally Posted by Aleone

When I accelerate to the floor the cart stops any thoughts

Gotta tell us a lot more than that and you do not need to cross-post or hijack. Start your own thread with all the details of your cart and the problem.

Timinator · 08-10-2019, 08:11 AM

So, I have a MCOR 4 upgrade and it's been....ok? I still have an initial dead spot while starting up then the cart lurches forward. Also, there is no smooth low speed cruising speed, it's pulsing. Full speed is fine though. Lot's of power. I'm not sure what the deal is.

TahoeDawgZ71 · 08-10-2019, 09:50 AM

Quote:

Originally Posted by Timinator

So, I have a MCOR 4 upgrade and it's been....ok? I still have an initial dead spot while starting up then the cart lurches forward. Also, there is no smooth low speed cruising speed, it's pulsing. Full speed is fine though. Lot's of power. I'm not sure what the deal is.

Did you order it from us? If not, pay close attention to the sticker on the side of the MCOR4. If it says "CHINA" on the label, it's junk. Replace it with an OEM version.

10-04-2018, 10:12 PM	#101
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 9,634	Re: MCOR / Pedal Assembly Confusion Explained I do not have a digital copy of these instructions. I'll see if I can dig some up Monday. I'm not working tomorrow. Wife and I are going to a concert. As for the pivot rod, the 102026001 has an extra barb that fits into the drive bar to keep it from falling off. The old ones don't have this. It'll fit around the base of the pedal, but it'll be sloppy. You'll probably end up having to use it.

10-08-2018, 07:15 AM	#102
BBBHC Gone Wild Join Date: Jul 2018 Location: Central Ohio Posts: 1,320	Re: MCOR / Pedal Assembly Confusion Explained That would be very helpful David! I've looked around, but don't see any clear install pictures/diagrams for how it is mounted.

10-14-2018, 08:21 PM	#104
Txpartyguy Not Yet Wild Join Date: Oct 2018 Posts: 1	Re: MCOR / Pedal Assembly Confusion Explained I have a 2014 precedent anyone know if the mcor 4 will hook right up with out any type of conversion plug or anything or do I need to take apart before I order part to make sure don’t really want to take apart till I got part as I can still use my cart...Thanx
Txpartyguy Not Yet Wild Join Date: Oct 2018 Posts: 1

11-27-2018, 05:32 PM	#106
67msarge Not Yet Wild Join Date: Mar 2010 Posts: 8	Re: MCOR / Pedal Assembly Confusion Explained TahoeDawg, ordered my MCOR2 to MCOR4 Conversion Kit for Precedent with Gen2 Pedal Assy - AM293001 from ya. hope it cures my problems. benched checked old one and resistance was jumping all over the place just like when driving it! Thanks Lee
67msarge Not Yet Wild Join Date: Mar 2010 Posts: 8

02-12-2019, 11:12 AM	#107
Aleone Not Yet Wild Join Date: Jan 2019 Posts: 2	Re: MCOR / Pedal Assembly Confusion Explained When I accelerate to the floor the cart stops any thoughts
Aleone Not Yet Wild Join Date: Jan 2019 Posts: 2

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-10-2019, 08:11 AM	#109
Timinator Not Yet Wild Join Date: May 2015 Location: Ohio Posts: 41	Re: MCOR / Pedal Assembly Confusion Explained So, I have a MCOR 4 upgrade and it's been....ok? I still have an initial dead spot while starting up then the cart lurches forward. Also, there is no smooth low speed cruising speed, it's pulsing. Full speed is fine though. Lot's of power. I'm not sure what the deal is.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
05 Gas Club Car Brake pedal assembly	Gas Club Car
i need a picture of a columbia gas pedal assembly. please	Gas Columbia ParCar
Brake Pedal Assembly	Electric EZGO
Mcor & Controler Confusion ?????	Electric Club Car
brake pedal assembly	Electric Club Car