1996 Electric DS Club Car Transaxle renovate

jamesnz

I have a 1996 48V Electric DS Club Car that has a Kawasaki transaxle model MC008K7E1591. The transaxle is starting to become a little noisy and before I dismantle it I would like to have a set of replacement bearings ready to install.
What I would like to know ... Can any one identify the 4 different sized bearings involved by having the bearing manufacturer part # so that I could perhaps purchase them at any local Engineering supplier here in New Zealand or alternatively, who could sell me a set of bearings to fit this transaxle ?
(I am not sure if in fact the CC part numbers in the manual are correct for the kawasaki unit ?)
Any help would be greatly appreciated
Jamesnz

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Golfdog

I think you will find that there are only 3 diff. sizes. The input shaft has 2 x 6204, the intermediate gear has 1 x 6204 and 1x 6205 and the inner axle shaft has 2 x 6008
Hope that helps

jamesnz

Thanks GolfDog,
The CC numbers I got from the maintenance manual were :
5, 14, 18 and 20 which transposes to the CC part #'s :
2 x 1011291, 1 x 7330, 3 x 7335 and 1 x AM10080.
Looking at the breakdown display page I see what you mean and thanks again.

JamesNZ