|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-09-2014, 10:44 AM | #1 |
Getting Wild
Join Date: Oct 2012
Location: North Central Indiana
Posts: 80
|
Precedent Spindle bearings
Does anyone know what bearings and seals are in a front Precedent spindle?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-09-2014, 05:25 PM | #2 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,888
|
Re: Precedent Spindle bearings
The aftermarket bearing number is 6402RS, I don't think there's a grease seal, (they're "sealed" bearings)
BUT... You may have a problem! They're the same as my 07 DS... here's the problem, If I remember correctly, the bearings are crimped, or press fit into the hub, and are not easily replaceable! I'm pretty sure you may have to buy a complete replacement hub if your bearings are bad! |
10-09-2014, 08:23 PM | #3 |
Getting Wild
Join Date: Oct 2012
Location: North Central Indiana
Posts: 80
|
Re: Precedent Spindle bearings
While installing a lift tonight, I found bad bearings in a hub. That is the correct bearing number, and they were a royal pain to get out. You were also correct that there are no seals. Thanks
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G9 Good bearings, bent wheel or spindle? | Gas Yamaha | |||
Greasing bearings front bearings/ Bearing Buddies? | Gas EZGO | |||
08 CC Precedent-A Arm or Spindle lift kit? | Electric Club Car | |||
'04 Precedent Spindle Bushings | Electric Club Car | |||
Precedent Spindle or A-Arm Lift? | Lifted Golf Carts |