|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-13-2014, 12:39 PM | #1 |
Not Yet Wild
Join Date: Oct 2014
Posts: 2
|
accelerator response
I have a 2010 precedent 48 volt the accelerator does not respond until about half throttle any ideas? Thanks for all help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-13-2014, 01:18 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: accelerator response
Typically this is an MCOR (the throttle signal device)problem. Replace it.
|
10-13-2014, 01:57 PM | #3 |
Not Yet Wild
Join Date: Oct 2014
Posts: 2
|
Re: accelerator response
thanks I jumped the 2 wire connector it seems better but still have to depress pedal alittle to far to start cart moving can hear click as soon as pedal is depressed.
|
10-13-2014, 02:01 PM | #4 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: accelerator response
The connector you bypassed has nothing to do with the throttle signal that is applied to the cart. Check the resistance between the yellow wire and the white/black wire on the 3 pin connector as you cycle the pedal to get your answer there. It should start at around 6800 ohms at zero throttle and 1100 ohms on the floor.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G-11 intermittant non-response | Gas Yamaha | |||
No response at accelerator pedal; ATTN: scottb and shadowman | Electric Club Car | |||
No response at accelerator pedal | Electric Club Car | |||
"Strange" accelerator response in reverse | Electric Club Car | |||
Accelerator response issue | Electric EZGO |