lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-28-2014, 09:54 PM   #11
Not Yet Wild
 
///matth's Avatar
Club Car
 
Join Date: Sep 2013
Location: NJ
Posts: 22
Default Re: 07 precedent pedal problems?

crap.
anyone have one to trade?

Thanks for confirming this
///matth is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-28-2014, 10:05 PM   #12
Not Yet Wild
 
///matth's Avatar
Club Car
 
Join Date: Sep 2013
Location: NJ
Posts: 22
Default Re: 07 precedent pedal problems?

Tahoe, will your old post below work in my case?


"This information came straight from Club Car...

Cut the black/whire wire located in Pin 13 of the controller 16 pin plug approximately 2" from the plug housing

Attach black/white wire to purple/white wire located in Pin 3. Use 3M Scotchlok or equivalent connector.

Install resistors in all three wires of the the 3 pin connector at the MCOR.

The Excel car requires 451 ohm resistors, the IQ car requires none. 451 ohm resistors will be hard to find but Club Car tells me that a 460-470 ohm resistor from Radio Shack will work just as good. I actually had an old Excel harness to rob them from so I used the 451 ohm resistors.

Send me your email address and I'll send you the documentation that they sent me."
///matth is offline   Reply With Quote
Unread 10-29-2014, 10:26 AM   #13
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 7,966
Default Re: 07 precedent pedal problems?

Quote:
Originally Posted by ///matth View Post
Tahoe, will your old post below work in my case?


"This information came straight from Club Car...

Cut the black/whire wire located in Pin 13 of the controller 16 pin plug approximately 2" from the plug housing

Attach black/white wire to purple/white wire located in Pin 3. Use 3M Scotchlok or equivalent connector.

Install resistors in all three wires of the the 3 pin connector at the MCOR.

The Excel car requires 451 ohm resistors, the IQ car requires none. 451 ohm resistors will be hard to find but Club Car tells me that a 460-470 ohm resistor from Radio Shack will work just as good. I actually had an old Excel harness to rob them from so I used the 451 ohm resistors.

Send me your email address and I'll send you the documentation that they sent me."
It certainly will. I was just about to tell you that but you beat me to it.
TahoeDawgZ71 is offline   Reply With Quote
Unread 11-02-2014, 10:51 AM   #14
Not Yet Wild
 
///matth's Avatar
Club Car
 
Join Date: Sep 2013
Location: NJ
Posts: 22
Default

Do the resistors just go in series between the wires and connector?
///matth is offline   Reply With Quote
Unread 11-02-2014, 11:01 AM   #15
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 7,966
Default Re: 07 precedent pedal problems?

Quote:
Originally Posted by ///matth View Post
Do the resistors just go in series between the wires and connector?
Just cut the wire and solder in the resistor. Do it to all three wires.
TahoeDawgZ71 is offline   Reply With Quote
Unread 11-03-2014, 08:45 PM   #16
Not Yet Wild
 
///matth's Avatar
Club Car
 
Join Date: Sep 2013
Location: NJ
Posts: 22
Default

Thanks!
///matth is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Precedent Pedal Group Electric Club Car
electric pedal problems Electric EZGO
accelerator pedal problems Electric Club Car
pedal problems Electric Club Car
precedent foot pedal Golf Carts and Parts


All times are GMT -5. The time now is 03:02 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.