|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-22-2014, 04:06 PM | #1 |
Not Yet Wild
Join Date: Nov 2014
Posts: 2
|
Burned resistor values
Was wondering if anyone has one of these controllers apart and could help identify two resistors. Board id for the locations is r1 and r7.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-22-2014, 04:20 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Burned resistor values
I dont know resistor values for those, but, those resistors didnt just "wear out". New ones will likely instantly do the same when powered up.
|
11-22-2014, 04:33 PM | #3 |
Not Yet Wild
Join Date: Nov 2014
Posts: 2
|
Re: Burned resistor values
I've already replaced shorted zener diode and all shorted and blown transistors. I've been in the component level repair field for over 18yrs. I've tested all components in the path of these burned resistors. If anyone has any info or pictures of color codes it would be greatly appreciated.
Thank you! |
Tags |
burned resistors id |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Burned controller -- Can you ID this IC OR Resistor? | Electric EZGO | |||
Resistor hoop values | Electric golf carts | |||
OHM's values please | Gas Yamaha | |||
Torque values | Gas Club Car | |||
5TH speed resistor has a burned mark on resistor board and melted the wire | Electric EZGO |