|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-27-2015, 03:53 PM | #1 |
Not Yet Wild
Join Date: Aug 2014
Posts: 9
|
Run/tow cover mods with Alltrax controller
I'm putting my DCS back together with a new Alltrax DCX500 controller and even after cutting the cover down and relocating the controller lower on the panel, the run/tow switch is still a bit too close to the main solenoid contacts for my liking. Has anyone come up with a design to either remount the run\tow switch elsewhere or to extend the cover to allow for the larger controller?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-27-2015, 04:57 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Run/tow cover mods with Alltrax controller
The attached is the cover trimmed and pop-riveted to the cart body.
Others have use small project boxes from Radio Shack and at least one person has used a plastic AC outlet/switch box. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Environmental cover and Alltrax | Electric EZGO | |||
96 Txt controller cover removal | Electric EZGO | |||
Controller cover | Electric Club Car | |||
98 TXT Controller Cover Removal | Electric EZGO | |||
Controller cover | Electric EZGO |