|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-02-2015, 03:56 PM | #1 |
Not Yet Wild
Join Date: Jan 2015
Location: Alabama
Posts: 37
|
What diagram do I use? 2000 pds
I bought a used and abused 36V 2000 txt pds for $100. The controller is gone and all I have left is a heat sync. Should it have a tow run switch on the controller?
The F/R switch is down by where your legs would be and it looks like a dcs type. Not sure what diagram I need to follow. I have missing and chopped up wires. What kind of controller did it come with? It has a 2006 motor part 73445g02. Should I convert it to 48V since it needs batteries as well? Thanks. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-02-2015, 04:03 PM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,187
|
Re: What diagram do I use? 2000 pds
I would switch the FnR switch to justa plain rocker like used on the newer PDS or ClubCars wired into a PDS harness and switch to 48 volts.. If it has the original DCS motor they are supposed to have more torque than the PDS but you will need the DCS mapping for the controller
|
03-02-2015, 04:20 PM | #3 |
Not Yet Wild
Join Date: Jan 2015
Location: Alabama
Posts: 37
|
Re: What diagram do I use? 2000 pds
It has the pds motor.
Last edited by abamadude; 03-02-2015 at 05:20 PM.. Reason: i cant type |
03-02-2015, 05:16 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: What diagram do I use? 2000 pds
It is a pds motor # . Year 2000 saw the introduction of the PDS cart. The drive system was not the one we are all familiar with. It was a 1 yr production that was dumped for the 2001 PDS we all know today. The motor should work. Just grab a PDS diagram and wire it up that a way.
|
03-02-2015, 05:29 PM | #5 |
Not Yet Wild
Join Date: Jan 2015
Location: Alabama
Posts: 37
|
Re: What diagram do I use? 2000 pds
Can I get rid of the old F/R switch when I get a new controller?
|
03-02-2015, 05:48 PM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: What diagram do I use? 2000 pds
Yes, THat probably best, since you are going to convert to modern PDS. Do it in it's entirety
|
03-03-2015, 11:56 AM | #7 |
Not Yet Wild
Join Date: Jan 2015
Location: Alabama
Posts: 37
|
Re: What diagram do I use? 2000 pds
I'm looking at some old threads it looks like I might need a new wiring harness.
Early 2000 carts that have the f/r switch at knee level will be different? |
03-03-2015, 01:25 PM | #8 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,187
|
Re: What diagram do I use? 2000 pds
With a standard PDS wiring diagram you should be able to figure out the connections you need..
|
03-03-2015, 02:25 PM | #9 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: What diagram do I use? 2000 pds
Since you have missing and cut-off wires, I'd install a new wiring harness: https://shop.ezgo.com/products/Wire-...h-for-PDS.html
You can find them cheaper, but the link gives you a part number to search for. Also, can you post some pictures of the by-the-knee type PDS F/R switch assembly? I want to see the shape of the outer edge of the cam that has bumps or indentations in it to activate or deactivate the two micro switches. And do some Ohm measurements? What I'm looking for is which switches are closed in "F" and which switches are closed in "R". --------- I've got the DCS F/R switch that is used in a DCS cart figured out (One switch closed in F and both closed in R), but that switching sequence won't work with a PDS controller. A DCS controller defaults to F and switches to R when pack voltage is applied to Pin-4. A PDS controller essentially defaults to Neutral (no output to Field windings) and switches to F when pack voltage is applied to J1 Pin-3, or R when pack voltage is applied to J1 Pin-2. I don't believe EZGO redesigned the aluminum cam used in the DCS F/R to only active one switch or the other, and I'm pretty sure the controller used in early 2000 PDS carts is wired the same as the controllers used in post-2000 carts, so they played some games inside the wiring harness to make them work together and I need to know what the switch sequencing of the F/R switch they used is, to reverse engineer what they did. Thanks. Last edited by JohnnieB; 03-03-2015 at 05:13 PM.. Reason: had cart models mixed up. |
03-03-2015, 02:55 PM | #10 |
Not Yet Wild
Join Date: Jan 2015
Location: Alabama
Posts: 37
|
Re: What diagram do I use? 2000 pds
Thank you JohnnieB .
I will report back on the F/R readings. |
|
|
Similar Threads | ||||
Thread | Forum | |||
2000 Western 42v wiring diagram | Electric golf carts | |||
2000 ez go parts diagram?? | Electric EZGO | |||
wiring diagram 2000 gas clubcar | Gas Club Car | |||
I need a wiring diagram for a 2000 model EZ GO, any help??? | Electric EZGO | |||
2000 Charging Circuit Diagram | Electric EZGO |