|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-23-2015, 06:46 AM | #1 |
Not Yet Wild
Join Date: May 2015
Location: North Caroilna
Posts: 4
|
Please Help, new golf carter
Just installed an Alltrax SPM 500, HD solenoid and HD F/R switch. I have a 96 EZGO TXT ELECTRIC Cart. I hooked it all up last night and received a "pre-charge Failure" error on the New controller. Any ideas??
Also, I purshased everything from Scottyb at carts unlimited, great price and sevice!! Thanks in advance. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-23-2015, 07:32 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Please Help, new golf carter
Measure the voltage between the B- and B+ terminals on the controller.
It should read about 2V to 5V less than full pack voltage when solenoid is de-energized. If not, check the pre-charge resistor that is connected between the large studs on the solenoid. Should be about 250Ω for 36V and 470Ω for 48V. |
05-23-2015, 08:13 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Please Help, new golf carter
He was able to send more pictures to my email and I quickly noticed the fuse installed incorrectly. I think his problems will resolve once this is corrected.
|
05-23-2015, 12:03 PM | #4 |
Not Yet Wild
Join Date: May 2015
Location: North Caroilna
Posts: 4
|
Re: Please Help, new golf carter
I am getting 4 blinks, then solid green on controller when peddle pressed.
Seems to move fine in reverse, but shutters when I try to go forward. |