|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-06-2008, 03:43 PM | #1 |
Not Yet Wild
Join Date: Nov 2008
Location: SoCal
Posts: 25
|
Pedal bracket pin removal
Is there an easy way to remove the Accelerator pedal bracket pin.
I removed the cotter pin but the pin wont slide out. Do I have to dismantle the entire plunger to the pedal box to relieve the pressure to get it out. The pin is pretty old I have a 95 Medalist that I am replacing the steel Accelerator pedal. Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-06-2008, 03:51 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: Pedal bracket pin removal
That pin is probably rusted in there. Put the nut back on enough to protect the threads and try hitting it with a hammer from the passenger side to drive it out. Becareful with that bolt it is a special shouldered type.
|
12-06-2008, 05:31 PM | #3 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Pedal bracket pin removal
Yep, its rusted solid. Last one I removed took a cutting torch to get it out....that was after ripping the head off with a 3/4 inch impact.
|
12-06-2008, 06:29 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: Pedal bracket pin removal
Dang rusty old marathons, anyway Try lots of PB Blaster or similar rust remover and some time....
|
12-07-2008, 01:24 PM | #5 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,286
|
Re: Pedal bracket pin removal
|
12-07-2008, 01:37 PM | #6 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Pedal bracket pin removal
|
12-12-2008, 08:46 AM | #7 |
Not Yet Wild
Join Date: Nov 2008
Location: SoCal
Posts: 25
|
Re: Pedal bracket pin removal
Thanks
I ended up grinding it out and that was to easy. |
12-12-2008, 08:52 AM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: Pedal bracket pin removal
Oh! You are in So Cal ...... Well that explains why it was so easy
|
12-12-2008, 09:31 AM | #9 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Pedal bracket pin removal
I've had the rusted bolt issue before and usually causes brakes to drag.
When I finally get the bolt out by what ever means I will drill the shaft of the new one with a .0625 or 1/8" drill bit and drill and thread a grease fitting in the head before reassembling. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Need Club Car seat bracket | Golf Carts and Parts | |||
EZ-GO Brake bracket | Electric EZGO | |||
z-bracket | Lifted Golf Carts | |||
anybody selling Yamaha motor Drop bracket? | Big Block Talk! | |||
gas pedal sticking | Electric EZGO |