lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 12-08-2008, 08:10 PM   #1
Gone Wild
E-Z-GO
 
Join Date: Nov 2008
Location: Webster Groves, MO
Posts: 520
Default ok i HAVE- 50.3 VOLTS-

I am working on a 2003 bad boy buggy- I have juice to the switch, to forward and reverse switch, from the box under the floor that attaches to the accelarator- The volt meter registered 50.3 volts-each battery is between 6.2 and 6.3.

I step on the pedal and it clicks over under the passengers seat-\
are those the Solenoids? how do I check them?- where would I go next?


PS I rebuilt the foward reverse switch on our marathon- just like you folks said, Probabley took 1/2 and hour to do
and I and my brother in law swear the cart is faster?

the serial number is 56632 and the MFG code is 02M89 so does that mean its an 89 Marathon?
thanks Chris
csport is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 12-09-2008, 12:12 AM   #2
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: ok i HAVE- 50.3 VOLTS-

i,m stumped by the voltage #,s pack at 50 .3 but each battery at 6.2 or 6.3 it dosn,t add uo unless there are 8 six volt batts in there..................................
shadowman is offline   Reply With Quote
Unread 12-09-2008, 09:17 AM   #3
Getting Wild
 
Join Date: Feb 2008
Posts: 75
Default Re: ok i HAVE- 50.3 VOLTS-

That should be a 89.

On the 2003, to check soleniod check 2 small post for voltage, then 2 large.
2 small post should have voltage when you press pedal and hear the click, then with pedal pressed the 2 large should have voltage.
If thats good go to speed controller. Check with key on in foward, wheels of ground!!

B+ B- full voltage

B+ A1(m-) should be 0 then press pedal should go to full voltage. Has to be zero at start.

B- A1(m-) should be full voltage and go to 0 when pedal is pressed.
Carts Zone is offline   Reply With Quote
Unread 12-09-2008, 09:25 AM   #4
Gone Wild
E-Z-GO
 
Join Date: Nov 2008
Location: Webster Groves, MO
Posts: 520
Default Re: ok i HAVE- 50.3 VOLTS-

Yes sir- its a 48 volt system- Sorry I forgot to say that to begin with
Chris
csport is offline   Reply With Quote
Unread 12-09-2008, 04:13 PM   #5
nimda
Club Car
 
Join Date: Jun 2007
Posts: 12,912
Default Re: ok i HAVE- 50.3 VOLTS-

Quote:
Originally Posted by csport View Post


PS I rebuilt the foward reverse switch on our marathon- just like you folks said, Probabley took 1/2 and hour to do
and I and my brother in law swear the cart is faster?

There was probly a bad connection on one of the contacts and it was fixed during the rebuild. You do not gain extra speed simply by rebuilding the switch, you just fixed what needed fixing.
roady89 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
36 to 48 volts Electric EZGO
16 volts instead of 12?? Electric Club Car
ITS w/ 72 volts Extreme DC!
Its-pot Volts Electric EZGO
12 volts with key ON? Gas Yamaha


All times are GMT -5. The time now is 06:46 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.