94.5 EZGO wiring

DougieFresh

I ordered a speed torque kit from a catalog. It came with a Alltrax Axe 4855 R5 controller,DD motor, 200 amp solenoid,2 g wires and HD FR. Everything was good but when I parked on grass or got it wet It won't run. So I tried to install new solenoid and put my axe on a computer but never took picture of wiring. The kit I had bought had wires marked where they go and with no luck It does not run. It still Clicks and axe flashes 4 times then stays green. But if you look at the schematics for connecting the axe from online it is confusing with the wires marked from original. They are definitely different. I have always had the wires matches to what they where marked from outta box never seen a schematic with the kit. Now the wires are older and marking removed I had no choice but to wire it from the schematic online. And now it will not run at all.I looked at a stock EZGO and wired it the same and nothing. Is there anyone that might have old paper work from buggiesunlimited Speed/torque kit 1994.5 & up. This was purchased about 2010-2011

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Sir Nuke

Hey Dougie.....this should do the trick, its a 1994.5 to 2000 Alltrax AXE Wiring Diagram.

EZGO Series AXE NPX with KSI traced.JPG


oh and btw......Welcome to our happy little corner of the net, and to BGW. There is a BIG fridge on the back porch with anything you can think of in it...help yourself...of course only take what you can LEGALLY have. Make yourself at home on one of the big fluffy couches, kick your shoes off, put your feet up on one of the tables, yes we are allowed to do that, mom's, dad's, wives', husband's, girlfriend's and boyfriend's here don't care....and take it easy.



oh...btw....every once in a while a food fight breaks out...so you may not want to wear nice clothes here.

Welcome!!

DougieFresh

Thank You, I have that diagram, I will stick with it and begin from there.Is there any chance that I had it wired different from diagram and it worked? Or am I losing my mind. Just because the kit I bought had everything marked and now by the diagram they will be different.

Sir Nuke

start by tracing every wire the ENSURE you have it wired per their diagram. make absolute sure. You have to start there.