|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-07-2015, 09:54 PM | #1 |
Getting Wild
Join Date: Mar 2010
Posts: 96
|
Need your help! Txt lift conundrum
I have a 2002 pds txt that has an All Sports 5" lift kit with 22" rhox street tires on it due to course telling me my all trails were too aggressive. In my opinion it looks like too much lift for the tires since they are not aggressive at all. So what I'm looking for here is your help in asking can I go back to stock suspension with minor adjustments to it, or what is a better solution?
I am also in the process of getting a workhorse front cowl. Will that add enough clearance to go back stock? I never off-road the cart it's always on the street or course. I am planning on adding a backseat in the next couple of months as well. Thanks for your help guys! Sent from my iPad using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-07-2015, 10:10 PM | #2 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,976
|
Re: Need your help! Txt lift conundrum
what your course is telling you is your TIRES are not approved for course use.....it has nothing to do with your lift. what your course is trying to say is they most likely only TURF TIRES on the course. this is the case with many golf courses.
|
07-07-2015, 10:15 PM | #3 |
Getting Wild
Join Date: Mar 2010
Posts: 96
|
Sir nuke, already have a handle on that part. What I have pictured is what I have now and they have been approved. What I'm asking is how do I get her closer to the ground and keep current wheels and tires.
Sent from my iPad using Tapatalk |
07-08-2015, 06:51 AM | #4 | |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,976
|
Re: Need your help! Txt lift conundrum
Quote:
1. go back to stock height suspension, but that won't work as the tallest tires that will fin under are typically 20". but you could give it a try and see. OR 2. go back to the stock ride height but radius the wheel wells/body to allow clearance for the tires. OR 3. if you want/need to stick with the current wheel/tire set-up would just get a smaller lift and be done with it. |
|
07-08-2015, 07:15 AM | #5 |
Getting Wild
Join Date: Mar 2010
Posts: 96
|
Would one of the little cheap spacer 3" kits work for what I do with the cart?
Sent from my iPhone using Tapatalk |
07-08-2015, 07:23 AM | #6 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,976
|
Re: Need your help! Txt lift conundrum
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Can you put a Z bracket Lift ontop of a BU 6" suspention lift??? | Lifted Golf Carts | |||
No Spark Conundrum | Gas Harley Davidson | |||
Long Travel lift for 97 CC DS with Factory lift - Will this work? | Electric Club Car | |||
Spindle lift with Z lift - How to lift rear?? | Lifted Golf Carts | |||
Axle lift vs. Spindle lift- Pros and Cons | Electric EZGO |