2007 ezgo wont move

Tmaiyer · 08-05-2015, 04:17 PM

Lets keep this simple, I am not technical

Bought a 2007 with the F/R switch mounted under seat. Was running just fine and parked it for about an hour. Returned and wouldn't move. No clicks, nothing. Batteries charged. Can push it just fine so not the motor.
Replaced the solenoid, yes I wired it correctly. Still no sounds and no movement.
Upon further review wires actually melted the controller so bought a new controller. Installed and still nothing. No sounds and no movement
Before anybody suggests the F/R switch, I do have backup beeper when I put into R so don't think that's the issue.
Again, keep it simple. Ohms and Watts will confuse me.

scottyb · 08-05-2015, 04:34 PM

If the solenoid is not clicking when you try to go it likely the problem is in the solenoid activation circuit. See attached. You should have positive at the end of every red line starting at the charge receptacle (or battery main +) all the way to solenoid.
Problem could be a bad connection, failed micro switch, or burnt fuse.

Tmaiyer · 08-05-2015, 04:57 PM

Thanks Scooby but I don't see the attachment.

I found one fuse connected to the positive of the battery, 20amp fuse and it was good.

Wymorem · 09-20-2019, 05:25 PM

Anyone figure this one out? I would love to see the attachment

Timberwolflt · 09-20-2019, 05:31 PM

Scotty... you neglected to attach the schematic

Might be this one... and might not....

One of the many I saved to my phone for quick reference when they were helping me

Kinda depends on your controller

08-05-2015, 04:17 PM	#1
Tmaiyer Not Yet Wild Join Date: Aug 2015 Posts: 2	2007 ezgo wont move Lets keep this simple, I am not technical Bought a 2007 with the F/R switch mounted under seat. Was running just fine and parked it for about an hour. Returned and wouldn't move. No clicks, nothing. Batteries charged. Can push it just fine so not the motor. Replaced the solenoid, yes I wired it correctly. Still no sounds and no movement. Upon further review wires actually melted the controller so bought a new controller. Installed and still nothing. No sounds and no movement Before anybody suggests the F/R switch, I do have backup beeper when I put into R so don't think that's the issue. Again, keep it simple. Ohms and Watts will confuse me.
Tmaiyer Not Yet Wild Join Date: Aug 2015 Posts: 2

08-05-2015, 04:34 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: 2007 ezgo wont move If the solenoid is not clicking when you try to go it likely the problem is in the solenoid activation circuit. See attached. You should have positive at the end of every red line starting at the charge receptacle (or battery main +) all the way to solenoid. Problem could be a bad connection, failed micro switch, or burnt fuse.

08-05-2015, 04:57 PM	#3
Tmaiyer Not Yet Wild Join Date: Aug 2015 Posts: 2	Re: 2007 ezgo wont move Thanks Scooby but I don't see the attachment. I found one fuse connected to the positive of the battery, 20amp fuse and it was good.
Tmaiyer Not Yet Wild Join Date: Aug 2015 Posts: 2

09-20-2019, 05:25 PM	#4
Wymorem Not Yet Wild Join Date: Sep 2019 Posts: 14	Re: 2007 ezgo wont move Anyone figure this one out? I would love to see the attachment
Wymorem Not Yet Wild Join Date: Sep 2019 Posts: 14

Similar Threads
Thread	Forum
Ezgo dcs solenoid clicks but wont disengage and wont move	Electric EZGO
93 ezgo wont move	Electric EZGO
2007 txt wont move	Electric EZGO
ezgo wont move	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum