Turn signals...again

Blue Chip · 12-14-2008, 01:42 PM

Can someone provide me with the correct way to hook up the tail lights?

There are brake lights and a turn signal - I can't figure out what the hell is going on here...

Anyone have the stock ez go wiring harness all hooked up with brake lights and signals?

I would love to know which wires are hooked to which in the back of the cart...

CC-John · 12-14-2008, 11:59 PM

The factory wire harness colors are as follows..

Driver Side:
Taillamp - Blue/White
Brake/w Turn Sig. - White
Ground - Black

Pass. Side:
Taillamp - Blue/White
Brake/w Turn Sig. - Yellow
Ground - Black

The factory light fixture wiring is as follows:
Taillamp - Black
Stop/Turn - Red
Ground - White

Most aftermarket light fixtures are as follows:
Taillamp - Brown
Stop/Turn - Red
Ground - Black

Hope this helps..

Blue Chip · 12-15-2008, 06:46 AM

I think I have tried about every combo there is on this.... this one has me stumped.

At the current time here is what happens -

Brake lights - work fine.
Running lights - work fine

When you use the turn signal switch - the indicator light on the switch itseld lights up - it stays on steady. Nothing else happens though.

Let's say I turn the signal to indicate a left hand turn and hit the brakes - the left hand light doesn't light up at all....

HELP!!!!

Blue Chip · 12-15-2008, 02:39 PM

Got it.

Wires crossed in the front of the cart.... DUH!

12-14-2008, 01:42 PM	#1
Blue Chip Gone Wild Join Date: Dec 2007 Location: Central Florida Posts: 320	Turn signals...again Can someone provide me with the correct way to hook up the tail lights? There are brake lights and a turn signal - I can't figure out what the hell is going on here... Anyone have the stock ez go wiring harness all hooked up with brake lights and signals? I would love to know which wires are hooked to which in the back of the cart...

12-14-2008, 11:59 PM	#2
CC-John prop. A$$hole's Garage Join Date: Dec 2007 Location: Deep inside the Central Scrutinizer (77096) Posts: 1,587	Re: Turn signals...again The factory wire harness colors are as follows.. Driver Side: Taillamp - Blue/White Brake/w Turn Sig. - White Ground - Black Pass. Side: Taillamp - Blue/White Brake/w Turn Sig. - Yellow Ground - Black The factory light fixture wiring is as follows: Taillamp - Black Stop/Turn - Red Ground - White Most aftermarket light fixtures are as follows: Taillamp - Brown Stop/Turn - Red Ground - Black Hope this helps..

12-15-2008, 06:46 AM	#3
Blue Chip Gone Wild Join Date: Dec 2007 Location: Central Florida Posts: 320	Re: Turn signals...again I think I have tried about every combo there is on this.... this one has me stumped. At the current time here is what happens - Brake lights - work fine. Running lights - work fine When you use the turn signal switch - the indicator light on the switch itseld lights up - it stays on steady. Nothing else happens though. Let's say I turn the signal to indicate a left hand turn and hit the brakes - the left hand light doesn't light up at all.... HELP!!!!

12-15-2008, 02:39 PM	#4
Blue Chip Gone Wild Join Date: Dec 2007 Location: Central Florida Posts: 320	Re: Turn signals...again Got it. Wires crossed in the front of the cart.... DUH!

Similar Threads
Thread	Forum
ezgo turn signals update	Electric EZGO
Doesn't turn over	Gas Club Car
G16 don't turn off	Gas Yamaha
turn signals	Gas Yamaha
Turn Signals	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum