|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-12-2015, 11:01 PM | #1 |
Getting Wild
Join Date: May 2014
Posts: 94
|
88 marathon wont go.....just clicks
I jacked up one wheel and it is free but when I press pedal ...nothing
but when I spun the rear wheel and moved accelerator up and down it would spin slowly intermittently. The guy I bought it from said it had bad brushes???? How can I put 36 volts directly to motor to test it? Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-14-2015, 06:01 PM | #2 |
Getting Wild
Join Date: May 2014
Posts: 94
|
Re: 88 marathon wont go.....just clicks
Does anybody have any ideas?
Guess ill take the motor out. Anybody? |
08-15-2015, 04:43 AM | #3 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 88 marathon wont go.....just clicks
What is the battery pack volts?
The motor needs to be mounted to the rear end to test it the safe way. And lift the rear wheels off the ground. Don't use 36 volts to test the motor, Welcome to BGW This is the bench test that every one uses. Use two wrenches to remove the nuts on the motor studs. Use one to hold the bottom nut on the motor, and one to remove the top nut, do not let the stud in the motor turn while removing the nuts on the post http://www.empinc.biz/tech_support.p...troller_series |
08-15-2015, 09:03 AM | #4 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 88 marathon wont go.....just clicks
Attached are a parts manual for a 1988 Marathon and a service manual that ought to be close enough.
|
08-17-2015, 11:38 PM | #5 |
Getting Wild
Join Date: May 2014
Posts: 94
|
Re: 88 marathon wont go.....just clicks
Im getting a reading of 38volts
|
08-17-2015, 11:40 PM | #6 |
Getting Wild
Join Date: May 2014
Posts: 94
|
Re: 88 marathon wont go.....just clicks
The diagram of the motor test is different on my motor.
All four of my lugs are in a row. I dont know which ones are a1 or s1 a2 etc. |
08-18-2015, 12:53 AM | #7 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 88 marathon wont go.....just clicks
Start cleaning & get out your magnifying glass, its labeled....
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2001 EZ-Go Clicks but wont go | Electric EZGO | |||
92 Clicks but wont move - need help | Electric Club Car | |||
Ezgo dcs solenoid clicks but wont disengage and wont move | Electric EZGO | |||
1988 Marathon -solenoid clicks-wont move | Electric EZGO | |||
Clicks but wont go | Electric EZGO |