|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-20-2015, 05:21 PM | #1 |
Gone Wild
Join Date: Jul 2015
Location: kannapolis
Posts: 244
|
series motor test
How do I test a series motor
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-20-2015, 05:25 PM | #2 |
Guest
Posts: n/a
|
Re: series motor test
motor test in cart only
WARNING you don't want to make a big spark anywhere near the battery. jumper cables may be used black clip on battery negative, red clip on motor A1 post, tap the other ends together |
09-20-2015, 07:34 PM | #3 |
Gone Wild
Join Date: Jul 2015
Location: kannapolis
Posts: 244
|
Re: series motor test
ty I tried that and my motor is good. MY solenoid clicks but cart will not run. I upgraded from curtis1207 to spm48400. cart did not run before. I changed the controller. I upgraded all cables to 4g. I have not upgraded the front reverse switch
|
09-20-2015, 07:44 PM | #4 | |
Guest
Posts: n/a
|
Re: series motor test
test solenoid ... just hearing the click does not mean it's working
solenoid test Quote:
|
|
09-20-2015, 07:51 PM | #5 |
Gone Wild
Join Date: Jul 2015
Location: kannapolis
Posts: 244
|
Re: series motor test
New controller and solenoid ordered from scottyb
|
09-20-2015, 07:54 PM | #6 |
South LA Coonass
Join Date: Mar 2014
Location: New Iberia, LA
Posts: 531
|
Re: series motor test
|
09-20-2015, 07:56 PM | #7 |
Gone Wild
Join Date: Jul 2015
Location: kannapolis
Posts: 244
|
Re: series motor test
I put the new spm4800 and solenoid on the cart
|
09-20-2015, 08:00 PM | #8 |
Gone Wild
Join Date: Jul 2015
Location: kannapolis
Posts: 244
|
Re: series motor test
I wired up with the diagram that came with controllerDOC110-001-D_DWG-SPM-EZGO-TXT-WIRE-DIA.pdf
|
09-20-2015, 08:12 PM | #9 |
Gone Wild
Join Date: Jul 2015
Location: kannapolis
Posts: 244
|
Re: series motor test
I have checked every thing on the cart. Cant find anything wrong
|
09-20-2015, 09:03 PM | #10 |
Gone Wild
Join Date: Jul 2015
Location: kannapolis
Posts: 244
|
Re: series motor test
I connected DVM to the B- and M- on the controller and pushed the pedal and didnt get full 38.7V. So is sometthing wrong on the high current side
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Trade high speed/torque motor pds/dcs for series motor | Golf Carts and Parts | |||
36 volt GE series motor test | Electric EZGO | |||
Ezgo Series Controller Test? | Electric EZGO | |||
what to test next? ezgo series cart | Electric EZGO | |||
Club Car Series Controller + EZGO Series Wound Motor | Electric Club Car |