|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-03-2016, 03:08 PM | #1 |
Not Yet Wild
Join Date: Feb 2016
Posts: 13
|
Series Ezgo selniod jumper
Hey guys how's it going. So here is my issue I have a series Ezgo that would not run I put a jumper wire from selniod to battery n it works but unfortunately won't work without I opened my charger receptacle and there is no reed switch I believe so I'm just wondering what I can. Do. To fix this than again for ur help
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-03-2016, 04:26 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: Series Ezgo selniod jumper
The solenoid has 4 posts and the small ones have 2 polarities.
I'm wonder where this wire connects and if it made the solenoid click when it was connected ? |
02-03-2016, 04:48 PM | #3 |
Not Yet Wild
Join Date: Feb 2016
Posts: 13
|
Re: Series Ezgo selniod jumper
Thanx for reply Scotty yes I had read other threads saying to jump the small post with red wires on it to main positive then selniod clicks if I take of that jumper I canno get any click
|
02-03-2016, 04:52 PM | #4 |
Not Yet Wild
Join Date: Feb 2016
Posts: 13
|
Re: Series Ezgo selniod jumper
I'm just wondering what can I do to fix this problem I've went thru all wiring I.cant figure it outdoor the life of me
|
02-03-2016, 05:46 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: Series Ezgo selniod jumper
Here is a diagram of how the red wire is supposed to be activated when you step on the gas... sounds like your source may be the battery pack main instead of the charge receptacle. Either way the first connection from the source would be to the F&R micro switch.
|
02-03-2016, 05:51 PM | #6 |
Not Yet Wild
Join Date: Feb 2016
Posts: 13
|
Re: Series Ezgo selniod jumper
My main wire that goes from battery pack to selnoid ? So change that wire ?
|
02-03-2016, 05:53 PM | #7 |
Not Yet Wild
Join Date: Feb 2016
Posts: 13
|
Re: Series Ezgo selniod jumper
I changed the connector at batt the wire itself seems good
|
02-03-2016, 06:14 PM | #8 |
Not Yet Wild
Join Date: Feb 2016
Posts: 13
|
Re: Series Ezgo selniod jumper
This is the wiring
|
02-03-2016, 06:20 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: Series Ezgo selniod jumper
Yep - that's Ezgo series.
|
02-03-2016, 07:03 PM | #10 |
Not Yet Wild
Join Date: Feb 2016
Posts: 13
|
Re: Series Ezgo selniod jumper
So ne ideas on what my problem could be
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO runs if jumper wire from solenoid to battery | Electric EZGO | |||
mcor jumper | Electric Club Car | |||
Jumper wire from solenoid? | Electric Club Car | |||
2002 Series ITS cart won't move without jumper to solenoid | Electric EZGO | |||
Club Car Series Controller + EZGO Series Wound Motor | Electric Club Car |