|01-03-2009, 05:05 PM||#1|
Not Yet Wild
Join Date: Nov 2008
conversion of DCS to PDS possible????
I have a 1996 EZGO DCS. It has the Curtis 1206 9 pin controller. Looks like it has been underwater and is bad. I have a buddy who gave me a PDS controller with the three plugs on the front. Is there harness conversions and a way to install this controller in a DCS cart. It would save me hundreds of dollars if it can be done. By the way...Great Forum. I have learned tons from this site. Thanks to all who post.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|01-03-2009, 11:14 PM||#2|
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Re: conversion of DCS to PDS possible????
No - It cannot be done with what you have. You'll need a complete harness, f/r assembly (switch), motor, speed sensor...
|48 volt conversion||Extreme DC!|
|16 hp kawasaki conversion kit||Gas Club Car|
|Charger for 48v conversion?||Electric Club Car|
|48v conversion||Electric EZGO|