lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 01-07-2009, 10:03 PM   #11
Not Yet Wild
E-Z-GO
 
Join Date: Dec 2008
Location: georgia
Posts: 16
Default Re: ez go no goin

Quote:
Originally Posted by roady89 View Post
Did you check any of the control wiring?
yes
ITRAPGAK9 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 01-07-2009, 10:05 PM   #12
Not Yet Wild
E-Z-GO
 
Join Date: Dec 2008
Location: georgia
Posts: 16
Default Re: ez go no goin

Quote:
Originally Posted by gornoman View Post
What kind of new controller did you install? Was a fuse installed at that time?
Did you check the cables at the motor?
Since you upgraded the F/R switch I would concentrate there.
Also, give the solenoid a good rap with a screwdriver handle.
buggies unlimited
yes i checked those too
ill try taping on the solenoide in the am
ITRAPGAK9 is offline   Reply With Quote
Unread 01-07-2009, 10:12 PM   #13
nimda
Club Car
 
Join Date: Jun 2007
Posts: 12,912
Default Re: ez go no goin

Double check the small connections on the controller. If you don't mind, could you get a good close up pic of the controller and it's connections? Did you have to cut the throttle wires and crimp on spade connectors?
roady89 is offline   Reply With Quote
Unread 01-08-2009, 04:20 PM   #14
Not Yet Wild
E-Z-GO
 
Join Date: Dec 2008
Location: georgia
Posts: 16
Default Re: ez go no goin

Quote:
Originally Posted by roady89 View Post
Double check the small connections on the controller. If you don't mind, could you get a good close up pic of the controller and it's connections? Did you have to cut the throttle wires and crimp on spade connectors?
yes i pulled on the small connections on the controler yes i cut the wires and crimped on spade conectors but it ran fine for several days
ITRAPGAK9 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes



All times are GMT -5. The time now is 02:28 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.