|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-29-2016, 11:43 PM | #1 |
Not Yet Wild
Join Date: Sep 2014
Location: Revere,MA
Posts: 23
|
Help with Ez go medalist that won't go.
Trying to help friend with this cart. 36v to top of controller 36v to right post of controller and to right side of solenoid. Micro switches on floor has good continuity. When stepping on pedal solenoid clicks so does floor switches. Lost from here. Please help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-29-2016, 11:54 PM | #5 |
Not Yet Wild
Join Date: Sep 2012
Location: NC
Posts: 47
|
Re: Help with Ez go medalist that won't go.
just had the exact same issue. Mine was the solenoid, clicked but was so burned internally no amperage could pass. I would try jacking the rear of the cart up off the ground, key on, peddle down, putting it in forward, and jumpering the large posts of the solenoid with jumper cables. If it goes, the solenoid is bad.
|
04-29-2016, 11:58 PM | #6 |
Not Yet Wild
Join Date: Sep 2014
Location: Revere,MA
Posts: 23
|
Re: Help with Ez go medalist that won't go.
My buddy went to pick up a seloniod just in case we did this and it was the problem. Golf place said not to jump this model that it would cause more damage. Now he won't try it. Any other way of testing seloniod.
|
04-30-2016, 12:01 AM | #7 |
Not Yet Wild
Join Date: Sep 2012
Location: NC
Posts: 47
|
Re: Help with Ez go medalist that won't go.
jumping it is the exact same as it engaging. I mean just touch it to see, yes it will spark but if the wheels move thats it.
or just pay the $30 for a new one and try it. |
04-30-2016, 12:02 AM | #8 |
Not Yet Wild
Join Date: Sep 2014
Location: Revere,MA
Posts: 23
|
Re: Help with Ez go medalist that won't go.
Thanks joe. It's worth a shot in the am. Will post back.
|
04-30-2016, 08:39 AM | #9 |
Not Yet Wild
Join Date: Sep 2014
Location: Revere,MA
Posts: 23
|
Re: Help with Ez go medalist that won't go.
Tried jumper solenoid nothing happened. So am I to assume the solenoid is good and there is something else wrong.
|
04-30-2016, 08:46 AM | #10 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: Help with Ez go medalist that won't go.
Quote:
Follow the 7 tests below for DCS drive system. Let us know where the cart differs from the test results. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Medalist | Gas EZGO | |||
95 medalist w/dcs | Extreme DC! | |||
Need help with 95 medalist | Electric EZGO | |||
96 medalist | Electric EZGO | |||
Medalist | Electric EZGO |