lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 05-01-2016, 11:49 AM   #1
Gone Wild
 
Join Date: Nov 2015
Posts: 354
Default 2000 series cart ignition problem

Have a 2000 series cart that I bought with no batteries. Was told that the ignition switch was bad so they put in a toggle next to the charching receptacle. Long story short, it doesn't run. Had a wire from the toggle going to the white wire at back of receptacle and the other wire plugged into the top of the forward reverse directional switch.
Ignition wires were still plugged in but I'm not sure why. The green one was going into an orange wire that went into the controller.

I have no idea what to do from here. Thinking of going back to ignition but I'm nowhere near smart enough to read the electrical diagram.

Any suggestions short of taking it to the shop?
Hedger is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 05-01-2016, 12:54 PM   #2
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 68,529
Default Re: 2000 series cart ignition problem

That sounds okay, power goes to the F&R then the key switch. If your not using it remove the blue and green wires and connect them together or replace the defective key switch. power from key switch to pedal box switch to solenoid activation... see diagram
Attached Images
File Type: jpg Ezgo Series solenoid activation diagram.jpg (107.9 KB, 0 views)
scottyb is online now   Reply With Quote
Unread 05-01-2016, 04:17 PM   #3
Gone Wild
 
Join Date: Nov 2015
Posts: 354
Default Re: 2000 series cart ignition problem

I guess my question is, where do the wires from the toggle need to go and do I need to keep the wires from the ignition switch connected to anything? If I don't, I have a wire coming from the controller that's plugged into nothing. If anyone has a picture of what it should look like that may help. I struggle with the diagrams.
Hedger is offline   Reply With Quote
Unread 05-01-2016, 04:55 PM   #4
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 68,529
Default Re: 2000 series cart ignition problem

Diagram like this is no big deal, each line represents a wire. You said wire from receptacle to toggle to F&R microswitch(MS). I said sounds okay. Diagram shows red wire from charge receptacle to F&R ms. That's the wire you have interrupted with the toggle (on/off) switch - that's okay
Diagram shows red (+) from F&R ms to keyswitch (ks) if ks is bad you need to bypass or replace it so (+) goes to the pebal box. I said splice blue and green at ks.
From there diagram shows wire to the solenoid.

If that's no help then lets try picture repair. you post pics and we look for problems.
scottyb is online now   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Upgrade or Trade 2000 CC Series Cart? Electric Club Car
2000 ezgo series cart won't move Electric EZGO
any lowered 2000 and old ezgo series txt cart??? On Road Golf Carts!
2000 ez go series cart sits lower in the front????? Electric EZGO
2000 EZGO Series cart Electric EZGO


All times are GMT -5. The time now is 03:31 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.