AllTrax DCX400 Controller Question

hitmanharleyk · 01-18-2009, 11:00 PM

I have yet to hook my laptop up to my controller to program it. When I installed it I noticed a good increase in the torque and my top speed went from 18 to about 24-25. Am I topped out on torque with the factory settings or can I adjust for less speed and more torque ?

Prior to shipping my controller, the vendor asked the specs on my cart saying they would program it for me.

roady89 · 01-18-2009, 11:03 PM

No but I believe you can request a new feild map hex file from Alltrax and reprogram the feild map.

hitmanharleyk · 01-18-2009, 11:24 PM

Quote:

Originally Posted by roady89

No but I believe you can request a new feild map hex file from Alltrax and reprogram the feild map.

I'm not very smart and fairly new to carts, can you explain in a little more detail ? Are you saying no I'm not topped out or no I can't adjust for more torque / less speed ?

roady89 · 01-19-2009, 12:23 AM

You can set the top speed and maximum output of the controller with the Alltrax software but you cant do anything about torque without changing the feild map.(reflashing a new code into the controller) Ask Alltrax support about changing your feild map. They may or may not do it for you.

01-18-2009, 11:00 PM	#1
hitmanharleyk Gone Wild Join Date: Oct 2008 Location: Southwest Georgia Posts: 610	AllTrax DCX400 Controller Question I have yet to hook my laptop up to my controller to program it. When I installed it I noticed a good increase in the torque and my top speed went from 18 to about 24-25. Am I topped out on torque with the factory settings or can I adjust for less speed and more torque ? Prior to shipping my controller, the vendor asked the specs on my cart saying they would program it for me.

01-18-2009, 11:03 PM	#2
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: AllTrax DCX400 Controller Question No but I believe you can request a new feild map hex file from Alltrax and reprogram the feild map.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

01-19-2009, 12:23 AM	#4
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: AllTrax DCX400 Controller Question You can set the top speed and maximum output of the controller with the Alltrax software but you cant do anything about torque without changing the feild map.(reflashing a new code into the controller) Ask Alltrax support about changing your feild map. They may or may not do it for you.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Alltrax DCX400 PDS Installed On 06 TXT PDS	Electric EZGO
Alltrax Controller / Soleniod Question	Electric EZGO
Ebay Alltrax PDS Controller	Electric EZGO
question about alltrax controller	Electric EZGO
Alltrax Controller	Golf Carts and Parts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum