|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-05-2016, 08:16 PM | #1 |
Not Yet Wild
Join Date: Jul 2016
Posts: 7
|
EZ Go TXT Wont Move
Golf cart was working fine, got off to grab a cold one, hopped back on and nothing. I've tried my best to troubleshoot this without a post, but I just cant figure out whats wrong. Voltage at batteries is 37.9v after charging 12 hours last night. Solenoid clicks when pedal is pressed. Battery side solenoid terminal is at 37.8v, on controller side is 36.5v. Voltage at -B and -M of speed control box is 37v, and when I press the pedal it drops to 27v. Does any of this sound problematic or are the other things I can check or test? Thanks for any help!!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-05-2016, 08:27 PM | #2 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: EZ Go TXT Wont Move
Year and model please.
|
07-05-2016, 08:46 PM | #3 |
Not Yet Wild
Join Date: Jul 2016
Posts: 7
|
Re: EZ Go TXT Wont Move
Sorry, the model on the sticker says TXTECSTL, the date code says C0607.
|
07-05-2016, 08:56 PM | #4 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: EZ Go TXT Wont Move
This cart might help you.
|
07-05-2016, 09:08 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: EZ Go TXT Wont Move
It's a series cart and the F&R is bad
|
07-05-2016, 09:08 PM | #6 |
Not Yet Wild
Join Date: Jul 2016
Posts: 7
|
Re: EZ Go TXT Wont Move
Based on that its a series
|
07-05-2016, 09:18 PM | #7 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: EZ Go TXT Wont Move
If the solenoid clicks and you read pack voltage between the controller's B- and M- terminals. Push the pedal to the floor and the voltage should decrease to zero. If not, either the controller or the ITS is bad.
|
07-05-2016, 09:32 PM | #8 |
Not Yet Wild
Join Date: Jul 2016
Posts: 7
|
Re: EZ Go TXT Wont Move
The voltage from the -B and -M terminals starts at 37.2v but only goes to 27.2v when the pedal is fully pushed.
|
07-06-2016, 07:54 AM | #9 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: EZ Go TXT Wont Move
Take a look on Scottyb troubleshooting guide and see if this can give you some insight on your problem. http://www.cartsunlimited.net/ezgo-troubleshooting.html
|
07-21-2016, 07:27 PM | #10 |
Not Yet Wild
Join Date: Jul 2016
Posts: 7
|
Re: EZ Go TXT Wont Move
So after many hours of troubleshooting this, I finally discovered the problem. The 5 wire connector that plugs into the controller had a bad connection on the white wire. I've rigged it to work for now but I'd ultimately like a new connector. Problem is I can't seem to find them for sale. Anyone know where I can buy oneż
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Ezgo dcs solenoid clicks but wont disengage and wont move | Electric EZGO | |||
98 ds wont move | Electric Club Car | |||
sometimes wont move | Electric EZGO | |||
Help-'82 DS wont move | Electric Club Car |