|
01-20-2009, 10:43 AM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2009
Posts: 13
|
electric
Batteries go dead just sitting it will only go forward no matter which way the lever is in,
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-20-2009, 11:41 AM
|
#2 |
|
Stay thirsty my friends!
 Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,290
|
Re: electric
Is this a new problem?
Was anything done to the cart recently? Need to know the year and model of cart. |
|
|
|
01-22-2009, 08:13 PM
|
#3 |
|
Not Yet Wild
Join Date: Jan 2009
Posts: 13
|
Re: electric
just got it from a guy that need an electrical service and some cash to keep his power on. He said nothing was wrong with it but all the batteries needed to be replaced. He didn't lie about that. I just where I don't need to turn around.I'm thinking something wrong with the controller.Do you have any idea how much htey are?
|
|
|
|
|
01-22-2009, 08:18 PM
|
#4 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: electric
Nothing wrong with the controller if ti goes F or R
 Something wrong with the way F&R switch is wired? |
|
|
|
|
01-22-2009, 09:23 PM
|
#5 |
|
Gone Wild
Join Date: Jan 2009
Location: Texas Panhandle
Posts: 170
|
Re: electric
Sounds like something is keeping the activation circuit turned on examples ITS micro switch, key switch...
|
|
|
|
|
01-23-2009, 06:42 AM
|
#6 |
|
Not Yet Wild
Join Date: Jan 2009
Posts: 13
|
Re: electric
In one position one micro is on the other position both switches are on.If you unplug forward the cart doesn't move the switch is good and I ohmed the wire got power to the controller.On diagram there is another switch INITION INTERLOCKsorry caps lock on.That doesn't appear to the key?
|
|
|
|
|
01-23-2009, 08:14 AM
|
#7 |
|
Not Yet Wild
Join Date: Jan 2009
Location: capitola,fl
Posts: 7
|
Re: electric
What Kind Of Ez-go Is It I Had One Where The F/r Selctor Was Not Making Contact Below The Switches There Was Two Copper Cotacts That Were Not Touching
|
|
|
|
|
01-25-2009, 09:38 AM
|
#8 |
|
Not Yet Wild
Join Date: Jan 2009
Posts: 13
|
Re: electric
Its a j198 With diagrams Test 1 I didn't have 36 volts on B+ My diode are bad ones missing and the other is hanging by one side .resistor is good 252 ohms. hope I found the problem. Thanks so far now I got to find one
|
|
|
|
|
01-25-2009, 12:31 PM
|
#9 |
|
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: electric
What diodes are you talking about? Whats hanging? Sorry, I can't understand what your trying to say. If the cart is running forward and reverse the controller is fine. Something is keeping the solenoid engaged. It will be a stuck or bad micro, stuck solenoid or something is not wired correctly keeping the solenoid engaged. Do you hear the solenoid click when you apply throttle?
|
|
|
|
|
01-26-2009, 07:48 AM
|
#10 |
|
Not Yet Wild
Join Date: Jan 2009
Posts: 13
|
Re: electric
Accross the soliniod there is a small board or card. the drawing shows diode parellel a bleed down resistor.In a open circuit the voltage shows up everywhere .under load the largest load drops the majority of the voltage. the solinoid isn't stuck i can hear it click an with a meter there is no voltage there but the print shows you should see 36 volts there thru the resistor an the diode.. my card shows there used to be two diodes one is gone the other is hanging by one lead It undoubtly got hot and melted the solder.both micro switch switch work.later jerry
|
|
|
|
 |
|
||||||
|
|
Linear Mode
