|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-17-2016, 12:01 PM | #1 |
Gone Wild
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
PDS cart with speed chip --what about the magnet?
Got a 2002 ezgo stock PDS cart ( push button f/r).
Cart runs ok, and has a freedom speed chip , and it has a ge motor. Although i get about 17 mph with the speed chip, i was told if i change the magnet on the motor, to a 4 pole magnet, i would get more speed. I am aware this will work on club cars, but don't recall ever hearing you can do that on a pds cart with a speed chip?? So can i increase the speed on the 36 volt pds cart that has the freedom chip installed, by also changing the magnet to a 4 pole one? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-17-2016, 12:46 PM | #2 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: PDS cart with speed chip --what about the magnet?
Quote:
When unfettered, a stock PDS motor in a cart with stock height tires and stock gears will do about 24 MPH (5600 RPM) when powered by a 36V battery pack. If you can find a magnet disk with half the number of poles, the controller will think the motor is only spinning at 2800 RPM when you hit the max RPM for 36V applied. However, it sounds like something is holding that cart back, since it isn't reaching the normal 18-19 MPH with a speed chip. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
speed sensor and magnet on PDS cart | Electric EZGO | |||
Speed magnet | Electric Club Car | |||
Speed chip installed, whats next for more speed | Electric EZGO | |||
Anyone have speed magnet on a GE motor cart | Electric Club Car | |||
Speed Freedom Chip or Steep Hill Chip? | Electric EZGO |