|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-18-2016, 03:04 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2016
Posts: 5
|
EZGO TXT Rear end noise
First time post, I have a 2010 Electric TXT 48 volt that makes a rattling noise from the rear end when you let off of the accelerator and coast at higher speeds. I changed the rear end oil, that did not help. Hope you guys can help!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-19-2016, 12:31 AM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: EZGO TXT Rear end noise
number one is clean/grease the input shaft splines from the motor to axle interface. new input shaft "bumper" during that cleanup might also help. costs only a few bucks, might totally solve all the noise, and a used cart almost always needs that service done anyway.
|
|
|
|
|
07-19-2016, 02:51 PM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2016
Posts: 5
|
Re: EZGO TXT Rear end noise
Thank you for the response! I will try that and see if it helps.
|
|
|
|
|
07-19-2016, 05:54 PM
|
#4 |
|
Gone Wild
 Join Date: Jun 2014
Location: Green Valley, Az
Posts: 678
|
Re: EZGO TXT Rear end noise
These motors only have one bearing in them...in the end furthest from the rear end...might be a good time to replace it...bearing #6203. Most parts houses carry it.
|
|
|
|
|
07-19-2016, 06:15 PM
|
#5 |
|
Not Yet Wild
Join Date: Jul 2016
Posts: 5
|
Re: EZGO TXT Rear end noise
Are there any diagrams for the motor or threads on how to change the motor bearing?
|
|
|
|
|
07-19-2016, 07:00 PM
|
#6 |
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: EZGO TXT Rear end noise
|
|
|
|
|
08-16-2016, 07:33 AM
|
#7 |
|
Not Yet Wild
Join Date: Jul 2016
Posts: 5
|
Re: EZGO TXT Rear end noise
I replaced the bearing in the motor and that did not help. So i then removed the input shaft to checked the bearings on it. The bearings on the input shaft were catching when turned by hand. So I replaced them and now the rear end makes no noise at all. Thanks for everybody's help , suggestions and diagrams.
|
|
|
|
|
07-20-2017, 10:40 AM
|
#8 | |
|
Not Yet Wild
Join Date: Jul 2017
Posts: 28
|
Re: EZGO TXT Rear end noise
Quote:
I need to do this on a 98 TXT. Did you remove the motor and change the bearings on the input shaft while the differential was in the cart, or remove the differential? I'm looking to do all the axle bearings and brakes but think the input shaft bearings are making all the noise. |
|
|
|
|
|
09-06-2017, 10:14 PM
|
#9 | |
|
Getting Wild
Join Date: Nov 2016
Location: QRO. MEX.
Posts: 122
|
Re: EZGO TXT Rear end noise
Quote:
Is it required to remove motor and whole rear end? Anybody has this link updated? http://[URL]http://www.carrus.com/files/8113/7586/7388/48V_TXT_REPAIR_AND_SERVICE_MANUAL.pdf[/URL] |
|
|
|
|
|
09-06-2017, 10:15 PM
|
#10 | |
|
Getting Wild
Join Date: Nov 2016
Location: QRO. MEX.
Posts: 122
|
Re: EZGO TXT Rear end noise
Quote:
The one posted is not working |
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1996 EZGO TXT Electric Rear End Noise | Electric EZGO | |||
| 2003 EZGO pds rear end noise | Electric EZGO | |||
| 04 ezgo pds rear noise | Electric EZGO | |||
| Noise from Rear 79 Ezgo | Electric EZGO | |||
| EZGO Rear End Clicking Noise | Electric EZGO | |||
Linear Mode
