99 TXT won't move

Gvernon · 07-20-2016, 04:50 PM

I have replaced my key switch, and celenoid and have verified my controller is working properly. I have jumped the celenoid and the cart will move. The lights work, the backup indicater sounds, and there is 36V from the batteries. I have checked all connections. I am stumped?

wthompson912 · 07-20-2016, 04:52 PM

Have you checked the micro switch under floor mat in pedal box?

Gvernon · 07-20-2016, 05:53 PM

I can hear that micros witch try to activate. Is there a specific way to check it?

scottyb · 07-20-2016, 06:04 PM

Can you identify the drive system from the chart below?
Sounds to me like the solenoid is not clicking (closing)

Gvernon · 07-20-2016, 06:16 PM

I replaced the solenoid and it works when I jump it.

scottyb · 07-20-2016, 07:06 PM

Quote:

Originally Posted by Gvernon

I replaced the solenoid and it works when I jump it.

WHICH *** DRIVE SYSTEM!?

sorry, it's a solenoid activation problem.... can we know which drive system you have?

Gvernon · 07-20-2016, 09:32 PM

It's a Series from what I can tel.

scottyb · 07-20-2016, 10:55 PM

Quote:

Originally Posted by Gvernon

It's a Series from what I can tel.

From what you can tell or from following the flow chart I posted?

Gvernon · 07-21-2016, 09:22 AM

From the chart posted. It was a bit hard to read on my IPad.

scottyb · 07-21-2016, 10:22 AM

Quote:

Originally Posted by Gvernon

From the chart posted. It was a bit hard to read on my IPad.

I see this problem all the time, we post diagrams to help people and they can't read them on their phone or mobile devices. Frustrating on both ends. This site is best viewed on a PC.

Attached is the solenoid activation diagram for Ezgo series carts. Start at the charge receptacle and follow the red line all the way to the solenoid. You should have battery pack power at every point along the way. ie: F&R micro switch, key switch, pedal switch..... like that

07-20-2016, 04:50 PM	#1
Gvernon Not Yet Wild Join Date: Jul 2016 Posts: 6	99 TXT won't move I have replaced my key switch, and celenoid and have verified my controller is working properly. I have jumped the celenoid and the cart will move. The lights work, the backup indicater sounds, and there is 36V from the batteries. I have checked all connections. I am stumped?
Gvernon Not Yet Wild Join Date: Jul 2016 Posts: 6

07-20-2016, 04:52 PM	#2
wthompson912 Getting Wild Join Date: Dec 2012 Posts: 126	Re: 99 TXT won't move Have you checked the micro switch under floor mat in pedal box?
wthompson912 Getting Wild Join Date: Dec 2012 Posts: 126

07-20-2016, 05:53 PM	#3
Gvernon Not Yet Wild Join Date: Jul 2016 Posts: 6	Re: 99 TXT won't move I can hear that micros witch try to activate. Is there a specific way to check it?
Gvernon Not Yet Wild Join Date: Jul 2016 Posts: 6

07-20-2016, 06:16 PM	#5
Gvernon Not Yet Wild Join Date: Jul 2016 Posts: 6	Re: 99 TXT won't move I replaced the solenoid and it works when I jump it.
Gvernon Not Yet Wild Join Date: Jul 2016 Posts: 6

07-20-2016, 09:32 PM	#7
Gvernon Not Yet Wild Join Date: Jul 2016 Posts: 6	Re: 99 TXT won't move It's a Series from what I can tel.
Gvernon Not Yet Wild Join Date: Jul 2016 Posts: 6

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-21-2016, 09:22 AM	#9
Gvernon Not Yet Wild Join Date: Jul 2016 Posts: 6	Re: 99 TXT won't move From the chart posted. It was a bit hard to read on my IPad.
Gvernon Not Yet Wild Join Date: Jul 2016 Posts: 6

Similar Threads
Thread	Forum
will not move fwd/rev	Electric Club Car
1996 Series DS 48V won't move on ground, wheels barely move on jacks	Electric Club Car
won't move	Electric EZGO
EZ Go TXT won't move	Electric EZGO