lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 01-24-2009, 06:37 PM   #1
Getting Wild
 
Pats Fan Willy's Avatar
E-Z-GO
 
Join Date: Jan 2009
Location: Central Kansas
Posts: 75
Talking Need a little help

Hey everyone. I just started tearing down the golf cart so i could sand and paint the inside the battery/ motor compartment before i put the batteries in. Any way i was getting a feel for where everything went when i came across this green wire in the picture. Im sure its where it needs to be. The problem is the nut is missing on the bolt. So i guess my question is, Is there anything else that needs to go on the same bolt with this green wire. The cart is an 81 ezgo marathon?
Pats Fan Willy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 01-24-2009, 06:57 PM   #2
nimda
Club Car
 
Join Date: Jun 2007
Posts: 12,912
Default Re: Need a little help

Yes, I believe the main batteries 36 VDC + connection goes there. Don't quote me on that. You should locate a wiring schematic to be sure.
roady89 is offline   Reply With Quote
Unread 01-26-2009, 09:10 AM   #3
Getting Wild
 
Pats Fan Willy's Avatar
E-Z-GO
 
Join Date: Jan 2009
Location: Central Kansas
Posts: 75
Default Re: Need a little help

Does anyone know where to get a schematic for an 81 ezgo marathon
Pats Fan Willy is offline   Reply With Quote
Unread 01-26-2009, 09:26 AM   #4
Gone Wild
E-Z-GO
 
Join Date: Oct 2008
Location: Southwest Georgia
Posts: 610
Default Re: Need a little help

I'm assuming you didn't find what you needed in the "sticky's" above ??

Here's one that you might have to open in a different window or save it and open with a picture viewer program that might help, I'm not sure.
Attached Images
File Type: jpg EZGo-1994wiring1xa.jpg (51.1 KB, 16 views)
hitmanharleyk is offline   Reply With Quote
Unread 01-26-2009, 10:13 AM   #5
steeplejack x
 
pggroves's Avatar
E-Z-GO
 
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,337
Default Re: Need a little help

Quote:
Originally Posted by hitmanharleyk View Post
I'm assuming you didn't find what you needed in the "sticky's" above ??

Here's one that you might have to open in a different window or save it and open with a picture viewer program that might help, I'm not sure.
81 is definitely not a solid state speed controlled cart.

The first one in the sticky should work for you.

There are others for that resistor system with a little more clarity.

Go here!
pggroves is offline   Reply With Quote
Unread 01-26-2009, 12:53 PM   #6
Getting Wild
 
Pats Fan Willy's Avatar
E-Z-GO
 
Join Date: Jan 2009
Location: Central Kansas
Posts: 75
Default Re: Need a little help

pggroves, you mean this diagram. Cause i dont see the solenoid on this image.
Pats Fan Willy is offline   Reply With Quote
Unread 01-26-2009, 01:17 PM   #7
prop. A$$hole's Garage
 
CC-John's Avatar
 
Join Date: Dec 2007
Location: Deep inside the Central Scrutinizer (77096)
Posts: 1,563
Default Re: Need a little help

Quote:
Originally Posted by Pats Fan Willy View Post
pggroves, you mean this diagram. Cause i dont see the solenoid on this image.
The solenoid is right there on the back of the accelerator switch assembly...
CC-John is offline   Reply With Quote
Unread 01-26-2009, 01:28 PM   #8
Getting Wild
 
Pats Fan Willy's Avatar
E-Z-GO
 
Join Date: Jan 2009
Location: Central Kansas
Posts: 75
Default Re: Need a little help

Yes, but my solenoid has 4 points and the one on the diagram looks like it has 2. This diagram looks closer to my cart i guess. What do you guys think.
Pats Fan Willy is offline   Reply With Quote
Unread 01-26-2009, 01:36 PM   #9
prop. A$$hole's Garage
 
CC-John's Avatar
 
Join Date: Dec 2007
Location: Deep inside the Central Scrutinizer (77096)
Posts: 1,563
Default Re: Need a little help

Both schematics are for the same cart.. One is showing the actual wire/cable routing/connections, while the other is a pictorial locator of all the components.. Nearly all electric cart solenoids have 4 terminals, 2 large high amperage terminals, and 2 low amperage actuating terminals..
CC-John is offline   Reply With Quote
Unread 01-26-2009, 01:37 PM   #10
steeplejack x
 
pggroves's Avatar
E-Z-GO
 
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,337
Default Re: Need a little help

Quote:
Originally Posted by Pats Fan Willy View Post
Yes, but my solenoid has 4 points and the one on the diagram looks like it has 2. This diagram looks closer to my cart i guess. What do you guys think.
That one will work too!
pggroves is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes



All times are GMT -5. The time now is 06:09 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.