lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 08-20-2016, 04:25 PM   #1
Not Yet Wild
 
Join Date: Aug 2015
Posts: 10
Default Alltrax XCT400 + Off the lot 2016 TXT = ???

I purchased a new EZGO Freedom TXT off the lot a few months ago. I have been reading around the forums and understand the basics in regards to series motors. Not familiar with SEPEX Motor and why Alltrax says new FN controller only works on carts made after Sept 2016 (what's different). Would appreciate understanding speed and torque changes from a simple controller swap and if the FN would work on my cart. Thanks
BLTCushman is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 08-20-2016, 04:31 PM   #2
Carts Unlimited .net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 65,692
Default Re: Alltrax XCT400 + Off the lot 2016 TXT = ???

What Alltrax means is for Ezgo Sepex carts the 2015 controls will not accept FN 2 or FNKS and you must use the late 2016 model CONTROL, not 2016 cart... FN2 works on all yr carts when fitted with the 2016 late model control. PS Late 2016 controls not yet available.

Hope this helps
scottyb is offline   Reply With Quote
Unread 08-20-2016, 06:26 PM   #3
Not Yet Wild
 
Join Date: Aug 2015
Posts: 10
Default Re: Alltrax XCT400 + Off the lot 2016 TXT = ???

scottyb, Pleasure to get your input. Understand. Its controller not cart. available in Sept. Regardless of FN. What does 400A do to a sepex vs 300A? I understand in series it is more torque. Iif series need a new motor with winding if I want speed. Believe I understand that a sepex is essentially 2 electrical winding that repel vs a standard permanent magnet. So does the controller or the windings have the ability to adjust the current and create more RPM and or Torque?
BLTCushman is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
01 e-z-go 2016 batteries Alltrax XCT 400 Golf Carts and Parts
Alltrax XCT400 Fan Not Running Electric EZGO
XCT400 and new motor Electric EZGO
Motor selection- PDS with xct400 42v Electric EZGO
New XCT400 IQ installed now battery probs? Electric Club Car


All times are GMT -5. The time now is 12:46 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.