|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-24-2016, 10:27 AM | #1 |
Not Yet Wild
Join Date: Jan 2011
Location: texas
Posts: 3
|
Broken wire #24 on curtis 1264 controller
Have EZGO mpt 1000E, solenoid closes, then opens. Sometimes will run, then slows down. Have wire jammed in plug, probably bad connection. Can I replace just the plug and not whole wiring harness? Also had sprayed plug and controller pins with electro-contact cleaner, plastic swelled up, plug not going into controller fully.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-24-2016, 10:45 AM | #2 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: Broken wire #24 on curtis 1264 controller
Quote:
https://howlandtechnology.com/store/...-776164-1.html |
|
09-24-2016, 10:55 AM | #3 |
Not Yet Wild
Join Date: Jan 2011
Location: texas
Posts: 3
|
Re: Broken wire #24 on curtis 1264 controller
Thanks, but thats not it. This is 24 pin, 12 of them side by side
|
09-24-2016, 11:16 AM | #4 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: Broken wire #24 on curtis 1264 controller
It might be listed in the controller manual. I'm on bandwidth limited satellite internet, so I can't really do much in the way of online searches. Someone else here may be able to give you the correct answer faster.
Bob |
|
|
Similar Threads | ||||
Thread | Forum | |||
Speed Chip etc on a Curtis 1264 controller - EZGO Shuttle | Electric EZGO | |||
Curis 1264 controller | Golf Carts and Parts | |||
Curtis 1264 controller - new/never used | Golf Carts and Parts | |||
curtis 1264 controller question | Electric EZGO | |||
Broken wire? | Electric Club Car |