|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-26-2016, 12:49 PM | #1 |
Not Yet Wild
Join Date: Nov 2011
Posts: 68
|
Powerwise diode board question!!!!
I have an older powerwise charger with a diode board that has two terminals on it. One of the terminals broke off. My local shop has the three terminal board but I don't know if that would even work. Any help would be great.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-26-2016, 01:32 PM | #2 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: Powerwise diode board question!!!!
The 3 terminal board won't work. you need either the 2 terminal board or 2 individual diodes.
|
10-26-2016, 08:42 PM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Powerwise diode board question!!!!
3 terminal board Will work, with modification. Drill a hole in the mounting panel for the rectifier to mount on both sides (3 terminal is longer & only 1 hole lines up). Don't use the plastic insulator sheet. Use heatsink compound. Attach wires to outer 2 terminals. Ignore middle terminal.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Retro Powerwise board in a Powerwise II | Electric EZGO | |||
Powerwise Bad Board | Electric EZGO | |||
36v Powerwise Charger Control Board | Electric EZGO | |||
Diode and Fuse Set for EZGO Powerwise Charger | Golf Carts and Parts | |||
1997 resistor/diode circuit board orientation | Electric EZGO |