02-03-2009, 11:52 AM | #1 |
Not Yet Wild
Join Date: Feb 2009
Posts: 10
|
snowoj
have a 1992 ezgo elect,solenoid clicks and at times motor turns over for appox 10-30 seconds then nothing ,batteries full of charge and in good condition
. does anyone know if the f&r switch is grounded to body or just thru the battery cables to controller |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-03-2009, 12:01 PM | #2 |
Gone Wild
Join Date: Dec 2008
Location: Almont MI
Posts: 436
|
Re: snowoj
there are no chassis grounds on an electric golf cart...all grounds run to batteries
|
02-03-2009, 12:05 PM | #3 |
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: snowoj
Check/test the solenoid.
|
02-03-2009, 12:19 PM | #4 |
Not Yet Wild
Join Date: Feb 2009
Posts: 10
|
Re: snowoj
thanks for fast reply
how is the best way to test the solenoid without shorting out electical components know how on are car,but not sure on cart |
02-03-2009, 02:57 PM | #5 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: snowoj
Welcome to the forum snowoj....................
|
02-03-2009, 06:29 PM | #6 | |
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: snowoj
Quote:
Jack up cart and put rear axle on jack stands. With key on, FNR in gear, use a min 6ga jumper between large posts on solenoid. Put jumper on one post, press accelerator slightly to engage micro then touch jumper to other large post. If motor spins (wheels turn) then likely it is a bad or failing solenoid. |
|
02-06-2009, 12:58 PM | #7 |
Not Yet Wild
Join Date: Feb 2009
Posts: 10
|
Re: snowoj
Help Again
Cart On Jacks,jumped Solenoid,and Nothing Do Not Even See A Spark When Jumping The Solenoid. Could We Have A Bad Connection . How Does The Power Work Bat Cable Goes To Solenoid Then From Solenoid Too? Do Not Know The Name Of This Part[power Pack]?? Do Not Have A Break Down On Parts Description Names |
02-06-2009, 03:53 PM | #8 | |
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: snowoj
Time for some pictures.
What is the battery voltage at the charger port? Quote:
Here is a diagram and a schematic. Does it resemble your cart? Time to break out the meter and begin tracing, testing, and confirming the wiring. |
|
02-06-2009, 06:25 PM | #9 |
Not Yet Wild
Join Date: Feb 2009
Posts: 10
|
Re: snowoj
you got it thats the cart set up,got the cart owner to take all cables off and clean them
and go from there,i think he has a bad connections somewhere,so go to work will let you know what happens, my cart runs!! thanks |
02-07-2009, 02:52 PM | #10 |
Not Yet Wild
Join Date: Feb 2009
Posts: 10
|
Re: snowoj
thanks FOR THE HELP
CLEANED TERMINALS CONTROLLER FNR AND WIRES TO SOLENOID NOW WE HAVE POWER TO THE MOTOR AND WHEELS TURN, NOW WITH THE FNR CONTROLLER WE ONLY HAVE FOWARD NO REVERSE,BAD SWITCH? THERE ARE 2 IN THE CONTROLLER ANYONE KNOW BEST WAY TO TEST OR BYPASS THEM FOR TO SEE IF 1 IS BAD |