|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-01-2016, 10:29 AM | #1 |
Not Yet Wild
Join Date: Oct 2016
Posts: 24
|
99 medalist reverse not working
Hey guys,
I just ran into a problem on my 99 medalist. Just put new 4 guage wiring and new batteries. Ran all the wires correctly. There is a clicking going on when i put it in reverse. Reverse will not work. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-01-2016, 11:15 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 99 medalist reverse not working
Hello- you have either a Medalist made from 1994 - 1995 or you have a 1999 TXT. In either case, 2 very different drive systems were produced (series & DCS). You need to ID the drive system before we can help - see below.
|
11-01-2016, 11:47 AM | #3 |
Not Yet Wild
Join Date: Oct 2016
Posts: 24
|
Re: 99 medalist reverse not working
series
|
11-01-2016, 11:49 AM | #4 |
Not Yet Wild
Join Date: Oct 2016
Posts: 24
|
Re: 99 medalist reverse not working
36v system
|
11-01-2016, 12:05 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 99 medalist reverse not working
A clicking but no go? Sounds like the solenoid may be picking up and dropping out rapidly. This is common when voltage is too low to maintain the solenoids magnetic coil energizing.
Can you post some pics of the install. It's very curious you have this problem in one direction only. |
11-01-2016, 12:50 PM | #6 |
Not Yet Wild
Join Date: Oct 2016
Posts: 24
|
Re: 99 medalist reverse not working
Couldnt upload the video of it clicking but those pictures give you some pictures of the situation I have right now. I have the body off so its just bare.
|
11-01-2016, 02:01 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 99 medalist reverse not working
That's good, can we get a pic of the wires going into the big plug on the controller so we can see what color wire goes to what pin ?
|
11-01-2016, 02:10 PM | #8 |
Not Yet Wild
Join Date: Oct 2016
Posts: 24
|
Re: 99 medalist reverse not working
do these photos help any?
|
11-01-2016, 02:21 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 99 medalist reverse not working
Can we get a pic of the 4 cable terminal studs on the back of the F&R
|
11-01-2016, 02:28 PM | #10 |
Not Yet Wild
Join Date: Oct 2016
Posts: 24
|
Re: 99 medalist reverse not working
i hope this is it.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Reverse not working | Electric EZGO | |||
Reverse Not Working after F&R Replaced | Electric EZGO | |||
Reverse Not Working!! | Electric Club Car | |||
Reverse not working | Gas Yamaha | |||
Reverse not working exactly right on my 1999 Ez Go | Electric EZGO |