|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-21-2016, 06:17 PM | #1 |
Not Yet Wild
Join Date: Feb 2016
Posts: 33
|
Alltraxx dcx500 problem?
My Alltraxx dcx500 will not move and the led is flashing red 3 times, any help troubleshooting is appreciated.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-21-2016, 06:30 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Alltraxx dcx500 problem?
HPD - Pedal not returning to zero.
Error codes attached. |
12-21-2016, 07:37 PM | #3 |
Not Yet Wild
Join Date: Feb 2016
Posts: 33
|
Re: Alltraxx dcx500 problem?
Yea I have found those codes,my pedal is coming back out of the potentimoter and my micro switch is making,I was having issues with the micro switch so I related it. Should the switch stay made then when you press the pedal it unmakes that switch?
|
12-21-2016, 09:03 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Alltraxx dcx500 problem?
More details please. Did it run yesterday, but not today? Did it come out of another cart? If it has ran recently, that would help us conclude if the currently loaded parameters should be valid.
|
12-21-2016, 09:25 PM | #5 |
Not Yet Wild
Join Date: Feb 2016
Posts: 33
|
Re: Alltraxx dcx500 problem?
Yes it ran yesterday,the micro switch under the floor rubber corroded a few months back I took it apart and cleaned it aND got a new one to replace it with next time it acted up,which was this morning. So I replaced the switch since then it is flashing red on the controller. The switch I got has 2 prongs instead of one that the green wire would hook up to.
|
12-21-2016, 10:20 PM | #6 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Alltraxx dcx500 problem?
The Pedal micro-switch needs to be a Normally Closed (N.C.) switch.
If You use a Normally Open switch, it will throw an HPD error as soon as the key switch is turned ON and the micro-switch will disengage when you press the Pedal. |
12-21-2016, 11:07 PM | #7 |
Not Yet Wild
Join Date: Feb 2016
Posts: 33
|
Re: Alltraxx dcx500 problem?
The switch I got has both n.o.&n.c. I will check tomorrow to see if I got it right. Just so I'm sure when the pedal is pushed the switch activates and I will have the source going through the switch? And will the controller automatically reset or do I need to do something to reset it
|
12-22-2016, 06:37 AM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltraxx dcx500 problem?
The problem may be quite simple. You are using the wrong terminals on the 3 prong ms. Use the 2 that are normally open and close when you press the gas
|
12-22-2016, 09:00 AM | #9 |
Not Yet Wild
Join Date: Feb 2016
Posts: 33
|
Re: Alltraxx dcx500 problem?
Ok,now I feel like a complete D.A. that's all it was I swear I checked the 3 times yesterday. I guess sometimes you just need to walk away and start over.
Thanks for all the help guys! |
12-22-2016, 10:21 AM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltraxx dcx500 problem?
Ain't that the truth.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Power to dcx500 | Electric EZGO | |||
Alltrax DCX500 | Electric EZGO | |||
Alltraxx 600dcx | Golf Carts and Parts | |||
New DCX500 and No Improvements | Electric EZGO | |||
alltrax dcx500 | Golf Carts and Parts |