Trailer Hubs?

NoleFan

Is it possible to just replace the hubs on a TXT with the correct size trailer hubs?

Planning on replacing the front bearings/races, and figured it would be just as easy to purchase the whole already assembled hub kit for a trailer.

I assume as long as the axle size and bolt hole size are the same, everything would match up, but I wanted to check.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

jhnmflr

I'm not sure, but as long as the bolt pattern is good it should. The last set of front bearings I bought were from Advanced auto and they were for a trailer. 1" Spindle size I think.

crash test dummy

if they are 4 on 4" they will work ... but i would get the ezgo ones

MILLERTIME

New High Speed Trailer Hubs martin Wheel H4-c-b Lugs 4 1000# Bearings 1"

http://www.ebay.com/itm/New-High-Spe...JYWbVY&vxp=mtr

MILLERTIME

EZGO TXT Front Wheel Hub Gas & Electric 1979-2001.5 Golf Cart Part 79-01

http://www.ebay.com/itm/Front-Wheel-...9S~kcX&vxp=mtr

crash test dummy

those WILL NOT WORK !!
BOLTS IN NOT STUDS



(2) EZGO Golf Cart 1976-2001 1/2 Front Wheel Hub Kit with Bearings and Seals Set
http://www.ebay.com/itm/EZGO-Golf-Ca...pXI8ru&vxp=mtr

meimk

I would think there could be differences in spindle depth and offset if you go for generic trailer hubs. I would probably just stay with parts specified for the cart.