|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-26-2017, 10:39 AM | #1 |
Not Yet Wild
Join Date: Mar 2017
Posts: 1
|
Ez Go DCS no go when on the ground
I have received a six passenger DCS from my uncle, he said he put a new motor in it and now it doesn't go any where. I searched the motor and found it was a series motor. I have since put the correct admiral motor in it. if I lift the back axle off the ground the tires do start to turn (not smoothly). when I put it back on the ground it might move an inch forward.
I found the DCS diagnosis PDF on this website and have gone through all the steps, everything checks out. I need help, any insight would be greatly appreciated. thank you Alex |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-26-2017, 11:15 AM | #2 |
Getting Wild
Join Date: Dec 2016
Posts: 85
|
Re: Ez Go DCS no go when on the ground
Not an expert but it could possibly be a stripped drum...the splines get stripped, it's fairly common...the shaft will spin inside the drum hub...
|
|
|
Similar Threads | ||||
Thread | Forum | |||
12 volt ground to pack ground? | Electric Club Car | |||
Ground | Gas EZGO | |||
where to ground | Gas Yamaha | |||
48V frame ground on conversion... Ghost Ground! | Extreme DC! | |||
Ground?? | Electric Club Car |