lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 04-01-2017, 03:08 PM   #1
Getting Wild
E-Z-GO
 
Join Date: Apr 2010
Location: Aiken South Carolina
Posts: 105
Default Xct controller

I just installed my new xct 500 amp controller that I got from scotty. I get a single green light as it powers up . When I depress the pedal im getting at least 6 red blinking with no power to the motor, cart will not move.
Thanks for any help as im lost on where to start.
RicksRam is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 04-01-2017, 05:22 PM   #2
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 15,703
Default Re: Xct controller

The LED ought to blink green four time on power up (if it is programmed for a EZGO ITS throttle) and then go to steady green.

The error codes consist of a number of of green blinks followed by a number or red blinks, then a short pause and the green red sequence repeats. (Blink code list attached)

What is it installed in (DCS, PDS, TXT-48 or some other EZGO SepEx drive)?
Attached Images
File Type: jpg XCT Blink Codes.jpg (276.1 KB, 0 views)
JohnnieB is offline   Reply With Quote
Unread 04-01-2017, 05:31 PM   #3
Getting Wild
E-Z-GO
 
Join Date: Apr 2010
Location: Aiken South Carolina
Posts: 105
Default Re: Xct controller

Johnnie it does blink 4 times green then stops and stays green. But when I depress the pedal im getting constant red blinking as long as I hold the pedal down. This is a brand new controller and b2 motor I just ordered from scotty and I have wired it twice and still no motor run. Im lost
RicksRam is offline   Reply With Quote
Unread 04-01-2017, 06:11 PM   #4
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 15,703
Default Re: Xct controller

Continuous blinking red is a new one on me, sounds like it is time to contact Scotty.
JohnnieB is offline   Reply With Quote
Unread 04-01-2017, 07:54 PM   #5
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 68,433
Default Re: Xct controller

Continuous red blinking with pedal is a new one on me too. POst lots of pics of your install. Maybe we can see something?
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
RXV controller not responding to upgrade handheld device to program controller Electric EZGO
WTS/WTT 400amp SepEx Controller for Series Controller Golf Carts and Parts
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller Electric Club Car
Trade 400 amp 36v Curtis controller for 500 amp or higher 48v controller Golf Carts and Parts
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 Electric EZGO


All times are GMT -5. The time now is 10:10 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.