|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-02-2017, 11:22 AM | #1 |
Getting Wild
Join Date: Apr 2010
Location: Aiken South Carolina
Posts: 105
|
Voltage and Current on XCT Controller
Still having problems with new motor and controller. Xct 500 amp for DCS 36 to 48 volt upgrade hooked up the software with laptop. Software is showing no current and 2.1 volts when pedal depressed. Also has a warning down where it shows rpm and will not let me change it, It is showing 1000 rpms. This may be the problem but wont let me change it. Any help would be appreciated. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-02-2017, 11:46 AM | #2 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Voltage and Current on XCT Controller
Quote:
What does the warning say? With a XCT48500-DCS, there are no provisions for a speed sensor and the "Enable Speed Limit" box should not be checked. On the monitor tab, are any of the error flag set? |
|
04-02-2017, 12:33 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Voltage and Current on XCT Controller
Try deselecting monitor RPM on page 1
|
04-02-2017, 02:16 PM | #4 |
Getting Wild
Join Date: Apr 2010
Location: Aiken South Carolina
Posts: 105
|
Re: Voltage and Current on XCT Controller
got it scotty thanks . Just reset the controller
|
04-02-2017, 02:16 PM | #5 |
Getting Wild
Join Date: Apr 2010
Location: Aiken South Carolina
Posts: 105
|
Re: Voltage and Current on XCT Controller
Thanks Johnnie had to reset controller. thank you
|
|
|
Similar Threads | ||||
Thread | Forum | |||
key switch voltage and current | Electric EZGO | |||
Electric motor voltage/current questions | Electric EZGO | |||
RXV High Current Controller | Electric EZGO | |||
2008 TXT with PDS draws current with controller in ".tow" | Electric EZGO | |||
voltage across the controller | Electric EZGO |