ezgo golfcart doesn't work

Bennyboy

hello, i have a 1206mx controller in my golfcart, but the relay doesn't do anything anymore, the controller get's power supply, but there doesn't work anything, but on the motor we get between ground and A1 35volts, but between A2 and ground also 35volts. what could it be? need help fast

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

scottyb

Attached is the solenoid activation circuit for PDS (1206mx)
Depending upon the yr, power for the red line can start at the charge receptacle or the battery main +. There needs to be battery pack + at every end of all the red lines on the diagram when the pedal is depressed, key on, in gear.

At that time - you should read battery voltage between the 2 small terminals on the solenoid which will make a good solenoid Click closed.

Attached Images

Ezgo PDS solenoid activation diagram.jpg (148.6 KB, 0 views)