lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-11-2017, 08:08 PM   #1
harvesterguy
Not Yet Wild
 
Join Date: Aug 2014
Posts: 4
Default '02 PDS - Pulled Speed Chip - Won't go back to stock

I just bought an '02 Ezgo PDS cart with a "speed" chip already installed. I used gps to measure speed and it topped at 17mph. I pulled the chip and still get 17 mph. I went through the 5 time Neutral/Reverse toggle test but don't get any beeps.

I need to return this cart to stock speed as it is currently too fast for my kids. Thank you.
harvesterguy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-11-2017, 08:55 PM   #2
rib33024
......................
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
Default Re: '02 PDS - Pulled Speed Chip - Won't go back to stock

Turn the Tow/Run switch to Tow for a few seconds. And then back to run with out the speed plug in the controller
rib33024 is offline   Reply With Quote
Old 05-12-2017, 05:56 AM   #3
harvesterguy
Not Yet Wild
 
Join Date: Aug 2014
Posts: 4
Default Re: '02 PDS - Pulled Speed Chip - Won't go back to stock

I did that multiple times to no avail. I even tried swapping in a torque chip that is supposed to keep the regenerative braking with no change. Any other ideas?
harvesterguy is offline   Reply With Quote
Old 05-12-2017, 09:43 AM   #4
kgsc
Gone Wild
 
kgsc's Avatar
Mixed Breed
 
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,141
Default Re: '02 PDS - Pulled Speed Chip - Won't go back to stock

Try turning the run tow switch to tow then unplug the run tow wire from the controller with the chip out. Let it sit for a few minutes then hook the wire back up, flip it to run and try again.
kgsc is offline   Reply With Quote
Old 05-12-2017, 12:15 PM   #5
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: '02 PDS - Pulled Speed Chip - Won't go back to stock

Is the beeper disconnected?

Some PDS controllers won't change modes if beeper isn't connected.
JohnnieB is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO




Similar Threads
Thread Forum
TXT PDS Speed Chip Electric EZGO
2010 RXV motor sensor harness pulled off, Need help with which waire go back where? Electric EZGO
Speed chip installed, whats next for more speed Electric EZGO
Speed Freedom Chip or Steep Hill Chip? Electric EZGO
2001 TXT all stock Speed Chip?? Electric EZGO


All times are GMT -5. The time now is 08:40 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.