|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-23-2017, 11:41 AM | #1 |
Not Yet Wild
Join Date: Feb 2014
Posts: 2
|
Forward / Reverse Switch upgrade
Trying to find the best Forward / Reverse switch upgrade for a 1995 EZGO DCS (sepex) cart.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-23-2017, 11:48 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Forward / Reverse Switch upgrade
This is the diagram for the rocker switch replacement. Use a Precedent switch and housing.
|
06-23-2017, 01:40 PM | #3 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 18,001
|
Re: Forward / Reverse Switch upgrade
Scotty......do you sell that switch? that actually replaces the ezgo micro-switches for the F&R....is that correct?
The switches I have seen, have 6 spades on the back.....does anyone have a wiring diagram so someone like me know which wire goes where for that conversion noted above? and if I read Scotty's diagram above.....there is a diode between the yellow and the red wires.....how do you actually connect them together? OR is the diode internal to the switch? |
06-23-2017, 02:05 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Forward / Reverse Switch upgrade
Any 3 blade rocker switch with center off will work. The 6 blade switches are just 2 parallel switches in one.
|
06-23-2017, 02:17 PM | #5 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 18,001
|
Re: Forward / Reverse Switch upgrade
are those the same ones you use in your reverse contactor kits?
|
06-23-2017, 02:19 PM | #6 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 18,001
|
Re: Forward / Reverse Switch upgrade
what about the diode??
|
06-23-2017, 04:27 PM | #7 |
Not Yet Wild
Join Date: Feb 2014
Posts: 2
|
Re: Forward / Reverse Switch upgrade
Based o the above it looks like i am not removing the old switch / controller but rather just adding the rocker switch to control it. Is that correct ?
|
06-23-2017, 04:31 PM | #8 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Forward / Reverse Switch upgrade
Nope. The hockey puck goes away and is replaced by the new housing and switch.
|
06-23-2017, 04:56 PM | #9 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Forward / Reverse Switch upgrade
Quote:
And yes - you will replace your switch with this switch Your confusion may lie in the idea you need a HD F&R but in this cart no, you do not need a HD F&R but you can upgrade to a nicer rocker switch. |
|
06-23-2017, 05:38 PM | #10 | |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 18,001
|
Re: Forward / Reverse Switch upgrade
Quote:
Scotty, it looks like I am going to do that with the DCS I am about to upgrade.... BUT what about the diode that is in the drawing you posted above..... If I read your diagram, there is a diode between the yellow and the red wires.....how do you actually connect them together? OR is the diode internal to the switch? or what? as I don't see one in the picture in post #9 |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
Possibly time to upgrade forward/reverse switch? | Electric Club Car | |||
Forward/Reverse switch upgrade | Gas EZGO | |||
Forward/Reverse switch upgrade for pds cart | Electric EZGO | |||
Forward Reverse switch melted on forward...have question about replacement part | Electric Club Car |