2012 RVX EZGO won't move

Harryo · 06-29-2017, 02:52 PM

My RXV was working fine, no signs of any problems. Went to use it the other day and only get the reverser alarm in R and nothing in F. It seems that it will not even begin the startup test sequence. Batts indicate full charge with 50V at main leads. Brake will not release when Run/Tow switch is put in tow. The brake does release when applying the aux power jumper below the switch. Have checked the nine pin jumper block below the cup holder and all seems fine there. No signs of burning or corrosion on connections or components that I can see. Would appreciate any help I can get on where to next.

Thanks
Harryo

usgicollector · 06-30-2017, 04:22 AM

Why don't you start by checking out that brake. More times than not the brake is the problem.

06-29-2017, 02:52 PM	#1
Harryo Not Yet Wild Join Date: Jun 2017 Posts: 1	2012 RVX EZGO won't move My RXV was working fine, no signs of any problems. Went to use it the other day and only get the reverser alarm in R and nothing in F. It seems that it will not even begin the startup test sequence. Batts indicate full charge with 50V at main leads. Brake will not release when Run/Tow switch is put in tow. The brake does release when applying the aux power jumper below the switch. Have checked the nine pin jumper block below the cup holder and all seems fine there. No signs of burning or corrosion on connections or components that I can see. Would appreciate any help I can get on where to next. Thanks Harryo
Harryo Not Yet Wild Join Date: Jun 2017 Posts: 1

Similar Threads
Thread	Forum
2012 EZGO RXV 225/40-14 tires	Electric EZGO
More speed for 2012 Ezgo TXT	Electric EZGO
2012 ezgo price?	Electric EZGO
2012 48 volt yamaha won't move.	Electric Yamaha
Ezgo RXV 2012	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum